Xerox Printer 2060 IPS User Manual

Xerox DocuColor 2060  
NPS/IPS  
Master Index  
721P90601  
Version 8.0  
October 2002  
 
Index  
Symbols  
Show Scheduling Policy PJ 3-12  
#copies operator PD 1-9  
%%DocumentMedia command, example PJ  
4-3  
%%XEROX-XIPP command PJ 6-7  
%stdin PD 1-31  
Staple command PJ 5-7  
Start PJ 3-13  
Start Virtual Printer PJ 2-7  
Stop Virtual Printer PJ 2-7  
access requirements, delivery IP 6-15  
access to printer, remotely  
telnet SJ 8-1  
() (parentheses)  
DOS xcat DC 6-15  
SunOS/Solaris formmerge DC 6-19  
.pfb extension PD 1-6  
Web-based SJ 8-1  
access, remote CM 1-4  
Account information, Quick Print for  
Windows NT 4.0 SJ 6-24  
account information, specifying PJ 1-8  
accounting file versions CM 9-2  
accounting files  
/var/db/forms directory DC 4-3, DC 6-3  
/var/spool/data directory PJ 6-3  
File of Files default DC 6-5  
generating PostScript files DC 6-3  
storing files DC C-1  
Xcat jobs default DC 6-12  
copying to floppy CM 9-8  
deleting CM 9-9  
Numerics  
maintaining CM 9-1CM 9-9  
purging CM 9-7  
accounting information, purging IP 4-10  
Active List PJ 3-1  
10Mb/sec twisted pair standard IP 4-15  
4 mm cartridge tape drive IP 5-6  
4mm cartridge tape drive, cleaning RM 6-2  
adding Job Ticket PJ 4-2  
additional metrics entry PD 1-3  
address data, merging DC G-1  
addressing, relative PJ 6-1  
administrative mode DC 7-9  
administrator  
accessing commands CM 1-2  
changing password CM 1-3  
Adobe  
A
access level  
Cancel Documents command PJ 3-4  
Change Document Attributes PJ 1-29  
Change Virtual Printer PJ 2-3PJ 2-4  
Copy Virtual Printer PJ 2-4  
Create Virtual Printer PJ 2-2  
Delete Virtual Printer PJ 2-4  
EndOfRun command PJ 5-4PJ 5-7  
EndOfSet command PJ 5-6PJ 5-7  
Forward Document command PJ 3-5  
Hold Documents PJ 3-6  
Type Manager PD 1-6  
Adobe fonts IP 2-6, SO 2-7  
Adobe Photoshop DC 9-1  
AdobePS drivers  
List Documents PJ 3-7PJ 3-10  
List Virtual Printers PJ 2-5  
Promote Document PJ 3-11  
Release Documents PJ 3-11  
Set Virtual Printer Flags PJ 2-8  
Show Document Attributes PJ 1-30  
selecting SJ 4-6  
submitting print jobs SJ 4-22SJ 4-38  
Advanced Customer Training (ACT) IP B-3,  
RM 8-2  
Advanced Function Image and Graphics  
(AFIG) SO 5-1  
CM = Guide to Configuring and Managing the System  
IS = IPDS Solutions Guide PD = Guide to Using PDL  
Maintenance SJ = Guide to Submitting Jobs from the Client  
DC = Decomposition Service and Tools Guide  
IP = Installation Planning Guide  
PJ = Guide to Managing Print Jobs  
SO = System Overview Guide  
RM -Guide to Performing Routine  
TG = Troubleshooting Guide  
Master Index  
INDEX-1  
 
INDEX  
Advanced Function Presentation, see AFP  
advanced PostScript options  
Windows NT 4.0 (transparent)  
compressing graphics SJ 5-72  
overview SJ 5-71SJ 5-76  
printing error information SJ 5-73  
printing graphics in color SJ 5-73  
printing mirror images SJ 5-73  
printing negative images SJ 5-73  
printing with printer fonts SJ 5-74  
specifying format SJ 5-76  
specifying halftoning options SJ 5-75  
specifying printing resolution SJ 5-75  
using substitution table SJ 5-74  
using TrueType fonts SJ 5-76  
AFP  
attributes  
changing PJ 1-29  
description PJ 1-1  
methods for selecting PJ 1-3  
precedence PJ 1-6  
priority in setting PJ 1-6  
setting PJ 1-2  
showing PJ 1-30  
understanding PJ 1-1  
virtual printer PJ 2-1  
attributes, overview SJ 1-2  
.attrs file CM 2-3  
automatic highlight color rendering PJ 1-15  
AutoTabShift attribute PJ 1-8  
award certificate example DC 4-1, DC 4-7  
data flows IS D-1IS D-7  
B
definition IS 2-1  
overview IS 1-1  
page origins, modifying IS 4-19  
print flows IS D-1IS D-7  
resources IS 2-1IS 2-3  
back panel, Sun workstations IP 2-3, SO 2-4  
background form DC 7-2  
Background Forms  
creating DC 5-1DC 5-4  
cycling DC 5-5DC 5-8  
background menu CM 3-3  
background printing, Macintosh  
AdobePS driver SJ 4-26  
LaserWriter driver version 7.x SJ 4-2  
LaserWriter version 8.x SJ 4-14  
backing up  
summary IS 2-1  
AFP environment IP 1-8, SO 5-5  
AFP Font Collection IS 2-3, IS 4-2  
AFPDS IS 2-5  
AIX print flow IS D-6  
APA (all-points addressability) IS 2-1  
Apollo workstation SJ 2-15  
AppleTalk PD 1-17  
site files CM 2-9  
virtual printers list CM 2-11  
Xerox files CM 2-10  
network IP 4-10  
zone name, specifying IP 4-10  
application examples DC 1-2  
applications, customer responsibility IP 4-4  
appName subdirectory PJ 6-2  
architecture IS 3-4IS 3-7  
arc-to-bezier conversion PD 1-33  
AS/400  
backing up forms DC F-1  
Backup Site Files command CM 2-9  
Backup Virtual Printers List command CM  
2-11  
Backup Xerox Files command CM 2-10  
banking applications, example IS 1-7  
banner page  
AFP data flow IS D-5  
job message  
connections IS 2-11IS 2-12  
AS/400, parameters IP F-21IP F-28  
ASCII greeting message CM 12-4  
ASCII input PD 1-22  
Quick Print for Windows NT 4.0 SJ  
6-13, SJ 6-14  
Windows NT 4.0 (transparent) SJ  
5-61  
ASCIIFontName attribute PJ 1-8  
ASCIIFontSize attribute PJ 1-8  
asynchronous communications PD 1-18  
sender name  
Macintosh drivers (transparent) SJ  
4-9  
CM = Guide to Configuring and Managing the System  
IS = IPDS Solutions Guide PD = Guide to Using PDL  
Maintenance SJ = Guide to Submitting Jobs from the Client  
DC = Decomposition Service and Tools Guide  
IP = Installation Planning Guide  
PJ = Guide to Managing Print Jobs  
SO = System Overview Guide  
RM -Guide to Performing Routine  
TG = Troubleshooting Guide  
INDEX-2  
Master Index  
 
INDEX  
banner pages CM 4-1  
banner pages, Novell PJ 3-18  
bar compression CM 2-3, CM 2-5, CM 2-6  
BARR/AFP connection IS 2-12  
BARR/RJE connection IS 2-9  
BCOCA IS 2-4  
BCOCA (Bar code Object Content  
Architecture) IP 1-8, SO 5-5  
benefit book example DC 1-3  
bezier PD 1-33  
files created DC A-2  
proprietary compression DC 5-2  
Tiff/G4 format compared DC 3-2  
C
cables  
IBM channel IP 7-3  
locations IP 7-2  
calculating throughput DC D-2  
calibration  
billing  
evaluating output CM 15-2  
when to perform CM 15-1  
Cancel Documents command PJ 3-4  
canceling commands CM 1-2  
capabilities IS 3-8IS 3-10  
cartridge tape  
meter  
displaying CM 8-8  
printing, data CM 8-11  
report, printing CM 8-11  
billing meter  
reading IP 8-6  
drive IP 5-6  
reporting IP 8-6  
CCITT  
billing meters, reporting RM 8-3  
binary input PD 1-22  
printing speed PD 1-34PD 1-35  
specifications PD 1-34  
CD-ROM  
bindery entry PJ 3-16  
bitmaps PD 1-4, PD 1-14  
BitsPerSample TIFF tag DC E-1  
black areas, mapping PJ 1-16  
black pixels  
ejecting CM 2-2  
installing CM 10-2  
installing software updates from CM 2-7  
listing files on CM 2-8  
GetTiff macro DC 8-5  
Blank Back Sides PJ 1-9  
blank pages  
printing files from CM 2-8  
central processing unit IP 2-3, SO 2-3  
Change Administrator Password command  
CM 1-3  
XCat DC 6-10  
XMerge DC 6-5, DC 6-7, DC 6-14, DC  
6-18  
Change Document Attributes command PJ  
1-29  
booting the controller CM 3-2  
borders, invisible frame DC 4-7  
bounding box padding PD 1-32  
break page PD 1-18  
Change Imager Parameters command CM  
5-30  
Change PCL Imager Parameters command  
CM 5-34  
broadcast message  
Change Virtual Printer command PJ 2-3PJ  
2-4  
Change virtual printer command  
CycleForms attribute DC 5-5DC 5-8  
disposition attribute  
utility command CM 2-1  
Broadcast Message to All Execs command  
CM 2-1  
Broadcast message to all execs command  
CM 2-1  
browser based access CM 1-5  
BuildProfile option SJ 2-21  
bus and tag  
channel connection IP 1-5, SO 5-2  
ByteCode files  
examples DC 3-7, DC 4-3  
Mask, Form formats DC 3-3DC 3-6  
syntax DC 7-3  
Tiff/G4, ByteCode formats DC 3-2  
values DC 3-1  
overview DC 7-2  
CM = Guide to Configuring and Managing the System  
IS = IPDS Solutions Guide PD = Guide to Using PDL  
Maintenance SJ = Guide to Submitting Jobs from the Client  
DC = Decomposition Service and Tools Guide  
IP = Installation Planning Guide  
PJ = Guide to Managing Print Jobs  
SO = System Overview Guide  
RM -Guide to Performing Routine  
TG = Troubleshooting Guide  
INDEX-3  
Master Index  
 
INDEX  
changing imager parameters CM 5-30  
changing password  
full IS 5-2  
lines and borders IS 5-8  
mapping IS 5-3  
administrator CM 1-3  
operator CM 1-3  
overlays IS 5-7  
changing PCL imager parameters CM 5-34  
channel  
switching online and offline PJ 3-15  
channel attachments IP E-1IP E-3, IP E-6,  
IP E-7  
shading IS 5-9  
when to calibrate CM 15-1  
color billing RM 8-5  
color calibration SJ 2-21, TG 5-1  
procedure CM 15-2  
channel cable connector box IP 1-7, SO 5-4  
channel extender IS 2-9  
channel interface board IP 1-7, SO 5-4  
channel switching PJ 3-15  
channel-attached  
work flow CM 15-5  
color driver, Macintosh LaserWriter driver  
8.x SJ 4-40  
Color images IS 2-5  
color in forms DC 3-1, DC 3-6, DC 5-1  
color limitations IS C-1  
color models, using IS 5-3  
color pages in copiers SO 1-7  
colors  
cables IP 7-3  
systems IP 1-7, SO 5-4  
chapters, concatenating  
DOS xcat DC 6-15  
Sun OS/Solaris DC 6-19  
Windows XCat DC 6-7DC 6-12  
character  
presentation, matching PJ 1-14  
preset PJ 1-14  
rendering, automatic PJ 1-15  
replacing PJ 1-16  
codes PD 1-6  
illegal PD 1-18PD 1-20  
characteristics, image PD 1-15  
charpath operator PD 1-21  
checklists  
saturation  
converting PJ 1-14  
specifying PJ 1-14  
colorTables highlight color rendering PJ 1-14  
colorToHighlight rendering PJ 1-14  
command  
installation planning IP 4-5IP 4-7  
network installation IP 4-8IP 4-14  
preinstallation IP 4-8  
job status SO 4-6  
Chinese fonts PD 1-3  
lpq SO 4-6  
cleaning  
lpr SO 4-6  
4mm cartridge tape drive RM 6-2  
touch screen RM 6-2  
command sets IS 3-5  
commands  
clearance space IP 6-10IP 6-14  
client workstations  
administrator, accessing CM 1-2  
Cancel Documents PJ 3-4  
canceling CM 1-2  
Change Virtual Printer PJ 2-3PJ 2-4  
Configure utility CM 2-19CM 2-29  
control-D PD 1-17PD 1-22  
control-Z PD 1-18PD 1-22  
Copy Virtual Printer PJ 2-4  
copying  
communicating with network SJ 1-5SJ  
1-6  
overview SJ 1-1  
CMYK default PJ 1-23  
code examples, PostScript PJ 6-4  
collating, PCL Copy command PD 2-6  
color  
adding IS 5-1  
accounting data to floppy CM 9-8  
documents to floppy CM 2-3, CM 2-4,  
CM 2-5  
conditional processing IS 5-5  
data driven IS 1-1, IS 5-3  
evaluating output CM 15-2  
logs CM 9-11  
CM = Guide to Configuring and Managing the System  
IS = IPDS Solutions Guide PD = Guide to Using PDL  
Maintenance SJ = Guide to Submitting Jobs from the Client  
DC = Decomposition Service and Tools Guide  
IP = Installation Planning Guide  
PJ = Guide to Managing Print Jobs  
SO = System Overview Guide  
RM -Guide to Performing Routine  
TG = Troubleshooting Guide  
INDEX-4  
Master Index  
 
INDEX  
Create Virtual Printer PJ 2-2  
Promote Document PJ 3-11  
Release Document PJ 3-11  
Set IPDS Virtual Printer PJ 2-10  
Set Scheduling Policy PJ 3-12  
sets, installing PD 3-4  
Delete Virtual Printer PJ 2-4  
deleting  
accounting files CM 9-7, CM 9-9  
fonts CM 10-4  
forms CM 11-4  
shortcuts CM 1-1  
logs CM 9-12  
Show Document Attributes PJ 1-30  
Show IPDS Virtual Printer PJ 2-10  
Show Scheduling Policy PJ 3-13  
Start PJ 3-13  
Start Virtual Printer PJ 2-7  
status IP 4-10  
Stop PJ 3-14  
telnet CM 1-4  
terminating CM 1-2  
Duplex, PCL PD 2-9  
End, combining PJ 5-6  
EndOfSet PJ 5-3PJ 5-4  
entering CM 1-1  
font installation IP 2-6, SO 2-7  
Forward Document PJ 3-5  
Hold Documents PJ 3-6  
installing  
fonts from disk CM 10-2  
PCL fonts from disk CM 10-3  
job submission IP 4-10  
LCDS PD 3-2  
licensing CM 2-15CM 2-18  
List Documents PJ 3-7PJ 3-10  
List Virtual Printers PJ 2-5  
listing CM 1-1  
UNIX command tool IP 4-10  
utility CM 2-1CM 2-13  
communications, asynchronous PD 1-18  
Compatibility fonts IS 4-11  
complete media match PJ 4-6  
completed sheets PJ 1-21  
components  
hardware IP 5-6  
CDROM fonts CM 10-6  
floppy fonts CM 10-6  
fonts CM 10-6  
printer IP 3-1, SO 3-1  
printer controller IP 2-1, SO 2-2  
printing system IP 1-9  
logs CM 9-10  
listjob SJ 3-13  
components, curveto PD 1-33  
compression  
listq SJ 3-16  
lpc (UNIX) SJ 3-35  
lpd IP 4-10  
bar CM 2-3, CM 2-5, CM 2-6  
ByteCode files DC 3-3, DC 5-2  
quality PD 1-34  
lpq (DOS) SJ 3-31  
lpq (UNIX) SJ 3-32  
lpr SJ 3-19, IP 4-10  
lprm SJ 3-33  
TIFF images PJ 6-4  
compression tag, TIFF DC 8-5, DC E-1  
concatenating chapters  
DOS XCat DC 6-15  
merge, inserting DC G-7  
operator, accessing CM 1-2  
PCL Copy PD 2-8PD 2-9  
PCL Paper Source PD 2-12  
PJL PD 2-6  
Sun OS/Solaris DC 6-19  
Windows XCat DC 6-7DC 6-12  
conditional processing, adding color IS 5-5  
conditioning paper IP A-6IP A-7, SO A-6–  
SO A-7  
print SJ 3-2  
printing  
conditions, print queue PJ 3-1  
configuration  
font list CM 10-8  
choosing remote printer or print server  
CM 4-1CM 4-3  
differences between RPRINTER and  
PSERVER CM 4-1CM 4-3  
font sample CM 10-8  
form samples CM 11-3  
PCL font sample CM 10-9  
CM = Guide to Configuring and Managing the System  
DC = Decomposition Service and Tools Guide  
PJ = Guide to Managing Print Jobs RM -Guide to Performing Routine  
SO = System Overview Guide TG = Troubleshooting Guide  
IP = Installation Planning Guide  
IS = IPDS Solutions Guide  
PD = Guide to Using PDL  
Maintenance SJ = Guide to Submitting Jobs from the Client  
INDEX-5  
Master Index  
 
INDEX  
configuration reports  
CM 2-4  
printing CM 2-23  
configuration, network IP 1-11  
Configure utility  
changeable parameters CM 2-20  
options CM 2-23  
Configure utility commands CM 2-19CM  
2-29  
Copy Documents to Floppy command CM  
2-3  
Copy Documents to Tape command CM 2-4,  
CM 2-5  
Copy IOT Fault Data to Disk command CM  
2-18  
Copy Logs to Floppy command CM 9-11  
copy output PJ 1-9  
configuring  
NFS daemon CM 13-2  
configuring as PSERVER CM 4-4  
configuring as RPRINTER CM 4-5  
connections  
AS/400 IS 2-11IS 2-13  
mainframes IS 2-7IS 2-11  
RS/6000 IS 2-13IS 2-15  
connections, Ethernet SO 4-4SO 4-5  
connectivity  
Copy Virtual Printer command PJ 2-4  
CopyCount attribute PJ 1-9  
copying  
documents to diskette CM 2-3  
documents to DOS diskette CM 2-4  
Documents to Floppy command CM 2-3,  
CM 2-4, CM 2-5  
logs CM 9-11  
print-job data CM 9-8  
multiple SO 4-7  
to tape CM 2-4, CM 2-5  
consistency  
copying to diskette CM 2-3  
copypage PD 1-16  
font PD 1-16  
consumable supplies tables IP A-9, SO A-9  
continuous form, converting IS 4-18  
control-D command PD 1-17PD 1-22  
controller  
core interchange fonts IS 4-11  
correcting color calibration CM 15-9  
Correcting stacking problems TG 7-1  
corruption problems  
powering on CM 3-2  
database CM 2-28  
control-Z command PD 1-18PD 1-22  
conversion  
software CM 2-26  
cover page  
arc-to-bezier PD 1-33  
AdobePS driver SJ 4-27  
Macintosh, LaserWriter 7.x driver SJ  
4-10  
Macintosh, LaserWriter 8.x driver SJ  
4-15  
LCDS commands PD 3-2  
conversion programs IS B-1IS B-4  
coordinates  
device PD 1-1PD 1-2, PD 1-32  
user PD 1-1PD 1-2, PD 1-39PD 1-41  
Copies attribute PJ 5-11  
copies, multiple PJ 5-11  
Copy Accounting to Floppy command CM  
9-8  
Create Input Profile command CM 6-2  
Create Output Profile command CM 6-2  
Create Profiles command CM 6-2  
Create Virtual Printer command DC 7-1, PJ  
2-2  
copy count  
creating print queue, Novell PJ 3-16  
creating profiles CM 6-2  
current transformation matrix (CTM) PD 1-1  
curves PD 1-25, PD 1-33  
curveto components PD 1-33  
custom fonts IS 4-12  
Macintosh drivers  
AdobePS SJ 4-24  
LaserWriter 7.x SJ 4-9  
LaserWriter 8.x SJ 4-13  
Quick Print for Windows NT 4.0 SJ 6-11  
Windows NT 4.0 (transparent) SJ 5-57  
Copy Documents to DOS Floppy command  
customer responsibilities IP 1-12, IP 4-3IP  
4-5, IP 8-2IP 8-3  
CM = Guide to Configuring and Managing the System  
IS = IPDS Solutions Guide PD = Guide to Using PDL  
Maintenance SJ = Guide to Submitting Jobs from the Client  
DC = Decomposition Service and Tools Guide  
IP = Installation Planning Guide  
PJ = Guide to Managing Print Jobs  
SO = System Overview Guide  
RM -Guide to Performing Routine  
TG = Troubleshooting Guide  
INDEX-6  
Master Index  
 
INDEX  
customized forms DC 1-2  
customized forms, forms  
customized DC 1-3  
cut sheet, converting IS 4-18  
Cycle Exceptions DC 5-8  
application examples DC 1-2DC 1-4  
benefits DC 1-1, DC 1-6  
examples DC G-1DC G-7  
installing  
DOS DC 2-2  
cycle up time DC D-2, DC D-7  
CycleExceptions attribute PJ 1-9  
CycleForm value DC 5-5  
overview DC 2-1  
Windows DC 2-1  
overview DC 1-1  
CycleForms attribute DC 5-5DC 5-8, PJ 1-9  
Decomposition Service Tools, installing SJ  
2-6, SJ 2-15  
D
default  
data  
font PD 1-3  
adding color IS 5-3  
flushing PD 1-21  
user coordinate system PD 1-39PD  
1-41  
placement operators PD 3-2PD 3-3  
streams IS 2-5  
towers IS 2-6  
default color rendering PJ 1-20  
default Grayscale PJ 1-23  
default router IP 4-9  
transfer protocol PJ 3-5  
Data 1 fonts IS 4-12  
data base mode PD 3-2  
See also line mode  
data cables IP 7-1  
data flows  
default settings  
resetting job ticket  
Quick Print for Windows NT 4.0 SJ  
6-8  
Windows NT 4.0 (transparent SJ 5-55  
defaults  
AS/400 IS D-5  
mainframe  
Jog command PJ 5-10  
media specifications PJ 4-2  
media values PJ 4-2  
MVS AFP IS D-1  
MVS for remote printer IS D-2  
VM IS D-3  
VSE IS D-4  
media, setting CM 5-2  
options, listing CM 5-28  
scheduling policy PJ 3-12  
defining forms, Novell PJ 2-9  
definitions, nonstandard PD 1-11PD 1-12  
definitions, see sample printer definitions  
Delete Accounting command CM 9-9  
Delete Color Calibration command CM  
15-10, CM 15-11  
Delete Fonts command CM 10-4  
Delete Form command DC 7-4  
Delete Forms command CM 11-4  
Delete Logs command CM 9-12  
delete output profile command CM 6-3  
Delete Virtual Printer command DC 7-4, PJ  
2-4  
PS/2 IS D-5  
RS/6000 IS D-6  
data streams IP 1-8, SO 5-1, SO 5-5  
database  
corruption CM 2-28  
date, setting CM 7-1  
DCF/Script IS 5-8  
Decomp DC 1-3  
Decomp Service Install Options screen DC  
2-1  
decomposed forms  
directory location DC 4-3, DC 6-3  
file formats DC A-1DC A-4  
decomposing Background Forms DC 5-3  
decomposing time  
reducing PJ 5-13  
deleting  
accounting files CM 9-9  
fonts CM 10-4  
Decomposition Service  
forms CM 11-4, DC 7-4  
CM = Guide to Configuring and Managing the System  
IS = IPDS Solutions Guide PD = Guide to Using PDL  
Maintenance SJ = Guide to Submitting Jobs from the Client  
DC = Decomposition Service and Tools Guide  
IP = Installation Planning Guide  
PJ = Guide to Managing Print Jobs  
SO = System Overview Guide  
RM -Guide to Performing Routine  
TG = Troubleshooting Guide  
INDEX-7  
Master Index  
 
INDEX  
logs CM 9-12  
copying documents to DOS CM 2-4  
ejecting CM 2-2  
formatting CM 2-2  
installing licenses from CM 2-17  
installing software updates from CM 2-7  
listing files on CM 2-3  
virtual printers DC 7-4  
Deleting Input|Output profiles CM 6-3  
delimiters, EOF PD 1-18PD 1-20  
delimiting PostScript jobs PD 1-17PD 1-18  
delivery instructions, print job SJ 6-14  
delivery requirements IP 6-15  
demo mode, VIPP PD 3-3  
developer IP A-8, SO A-8  
Device Control command set IS 3-6  
device-dependent operators TG 5-2  
devices  
coordinates PD 1-1PD 1-2, PD 1-32  
dependent features PD 1-29PD 1-33  
DFA group number PJ 1-10  
DFA maximum set size PJ 1-10  
DFA support IS 1-2, IS 5-14  
diagnostic data, gathering CM 2-18  
Diagnostic Lockout feature IS 6-2  
diagnostic tools IP 1-13, SO 1-4  
dialog box options, customizing Quick Print  
for Windows NT 4.0 SJ 6-25  
dictionary operators  
printing documents from CM 2-9  
diskettes IP A-8, SO A-8  
contents, listing CM 2-3  
ejecting CM 2-2  
formatting CM 2-2  
Display Billing Meters command CM 8-8  
display monitor IP 5-6  
displaying  
date CM 7-1  
logs CM 9-10  
PDL code CM 2-6  
time CM 7-1  
displaying PDL code CM 2-6  
displaying virtual printers PJ 2-5  
disposition attributes  
examples DC 3-7, DC 4-3, DC 7-3  
Mask, Form formats DC 3-3DC 3-6  
Tiff/G4, ByteCode formats DC 3-2  
values DC 3-1, DC 7-3  
dividing print jobs PJ 5-1  
document attributes PJ 1-1  
Document Feeding and Finishing  
Architecture, see DFA  
Document Structure Editor (DSE) DC 9-1  
Document Structuring Conventions (DSC)  
PJ 4-2  
Execution PD 1-11  
IdleTime PD 1-10  
Printer PD 1-10PD 1-11  
Server PD 1-9  
Status PD 1-10  
System PD 1-8  
User PD 1-8PD 1-9  
Direct Bus and Tag IS 2-7  
directories  
forms location  
document types IS 1-8  
documentation IP C-1  
AS/400 IP F-28  
decomposed forms DC 4-3, DC 6-3  
non-default DC B-1  
installation  
IBM channel connections IP 7-3  
MVS references IP F-20  
DocumentID attribute PJ 1-11  
DocumentName attribute PJ 1-11  
documents  
Windows DC 2-2  
Xcat jobs default DC 6-12  
directory  
queue PJ 3-17  
required, DocuPrint file system PJ 6-3  
Disable Modem command CM 2-31  
Disable Remote Shell command CM 2-32  
disk space, installation requirements SJ 2-1  
diskette  
attributes PJ 1-1  
changing PJ 1-29  
list PJ 1-2  
see also attributes  
showing PJ 1-30  
copying documents to CM 2-3  
cancelling PJ 3-3  
CM = Guide to Configuring and Managing the System  
DC = Decomposition Service and Tools Guide  
PJ = Guide to Managing Print Jobs RM -Guide to Performing Routine  
SO = System Overview Guide TG = Troubleshooting Guide  
IP = Installation Planning Guide  
IS = IPDS Solutions Guide  
PD = Guide to Using PDL  
Maintenance SJ = Guide to Submitting Jobs from the Client  
INDEX-8  
Master Index  
 
INDEX  
changing full color to highlight color SJ  
reprint tool DC 6-13  
xcat tool DC 6-15  
6-19  
Decomp Service examples DC 1-1DC  
1-4  
xmerge tool DC 6-14  
DOS client software  
forwarding PJ 3-3  
installing SJ 2-2  
holding PJ 3-3  
removing SJ 2-6  
ID number, determining PJ 1-29  
ineligible PJ 3-8  
double byte fonts PD 1-3  
drilled paper  
listing PJ 3-7PJ 3-10  
master DC 4-1  
promoting PJ 3-3, PJ 3-11  
releasing PJ 3-3  
Quick Print for Windows NT 4.0 SJ 6-16  
Windows NT 4.0 SJ 5-64  
drivers, PCL 5c PD 2-17  
drivers, Xerox SJ 1-1  
scheduling PJ 3-12  
drives  
stapling  
cartridge tape IP 5-6  
long PJ 5-9  
disk IP 2-3, SO 2-4  
order PJ 5-10  
DVD-ROM IP 2-3, SO 2-4  
dry ink cartridge, replacing RM 4-2  
dry ink distribution PD 1-14  
DSE (Document Structure Editor) DC 9-1  
dual feeder IP 6-18  
status, determining PJ 3-7PJ 3-10  
DocuPrint NPS Setup window  
Quick Print for Windows NT 4.0  
accessing SJ 6-9  
image shift SJ 6-12  
Dual Mode SO 5-1  
imaging and job setup options SJ  
6-10SJ 6-13  
Dump Accounting command CM 9-7  
duplex  
job notes SJ 6-13SJ 6-14  
paper stocks SJ 6-15SJ 6-17  
Windows NT 4.0 (transparent)  
advanced PostScript options SJ  
5-71SJ 5-76  
color SO 1-7  
Duplex commands, PCL PD 2-9  
duplex printing PJ 5-11, PD 2-8  
specifying  
Windows NT 4.0 (transparent) SJ  
5-57  
copy count SJ 5-57  
finishing features SJ 5-59  
highlight color SJ 5-67SJ 5-71  
image shift SJ 5-58  
job notes SJ 5-59SJ 5-61  
overview SJ 5-56  
duplexing with MultiSet PJ 5-11  
DVD-ROM drive IP 2-3, SO 2-4  
dynamic media, setting PJ 4-5PJ 4-6  
dynamic plex changes PJ 7-2  
page orientation SJ 5-57  
page range SJ 5-57  
paper stocks SJ 5-61SJ 5-64  
paper weight SJ 5-58  
preferences SJ 5-76  
E
EarlyStaple option PJ 5-9  
EBCDIC PD 3-2  
edge deletion SJ 4-40  
eexec operator PD 1-8  
Eject CD-ROM command CM 2-2  
Eject CDROM command CM 2-2  
Eject Floppy command CM 2-2  
ejecting a CD-ROM CM 2-2  
ejecting a diskette CM 2-2  
electrical  
programming, Main Stock SJ 5-58  
sides to image SJ 5-57  
special pages SJ 5-65SJ 5-67  
DOS  
formmrg tool DC 6-13  
getg4 tool DC 9-1DC 9-2  
installing Decomp Services DC 2-2  
specifications IP 5-1IP 5-3, IP 6-1  
CM = Guide to Configuring and Managing the System  
DC = Decomposition Service and Tools Guide  
PJ = Guide to Managing Print Jobs RM -Guide to Performing Routine  
SO = System Overview Guide TG = Troubleshooting Guide  
IP = Installation Planning Guide  
IS = IPDS Solutions Guide  
PD = Guide to Using PDL  
Maintenance SJ = Guide to Submitting Jobs from the Client  
INDEX-9  
Master Index  
 
INDEX  
elevator tray fault DC D-7  
ElideHeader attribute PJ 1-11  
Elixir products IS 4-3IS 4-5  
embedding images PD 1-34, PD 1-43  
Enable Modem command CM 2-30  
Enable Remote Shell command CM 2-31  
enabling  
Quick Print for Windows NT 4.0 SJ 6-21–  
SJ 6-22  
ExceptionPages attribute PJ 1-11  
Execution Dictionary operators PD 1-11  
exitserver operator PD 1-20, PD 1-22  
explanation of benefits, see EOBs  
extensions, proprietary PostScript PD 1-16  
lpr security option CM 12-5  
EndOfRun command PJ 5-4PJ 5-7  
EndOfSet command PJ 5-3PJ 5-4, PJ 5-6–  
PJ 5-7  
F
fast scan direction PD 1-35, PD 1-38  
fax resolution PD 1-34  
FDOCA IS 2-4  
engine  
write-black PD 1-15PD 1-16, PD 1-26  
write-white PD 1-15PD 1-16  
enhancement, resolution PD 1-12PD 1-16  
entering commands CM 1-1  
Enterprise Printing Option IS 3-3  
entry, bindery PJ 3-16  
features, device dependent PD 1-29PD  
1-33  
feedback, job status SO 4-5SO 4-6  
feeder tray attributes, setting CM 5-4  
feeder trays IP 3-14, SO 3-15  
feeder, establishing PJ 4-1  
feeding options IS 5-14  
specifications IS A-3  
environmental requirements IP 6-5  
EOBs, printing IS 1-8  
EOF delimiters PD 1-17PD 1-20  
eofill TG 5-4  
fields, form references DC 8-7DC 8-9  
file  
erasepage operator PJ 5-2  
error  
name, static form DC G-7  
PPD PD 1-28PD 1-29  
file formats, decomposed forms DC A-1DC  
A-4  
file locks  
setting maximum CM 4-6  
File of Files  
limitcheck PD 1-31  
undefined command PD 1-18  
error condition, restarting printer TG 7-4  
error handling SJ 4-18, SJ 4-30  
error messages, Client Software installation  
TG 2-2  
error page DC 6-5, DC 6-14, DC 6-18  
ESCON connection IS 2-8  
estimates, rough performance DC D-2  
Ethernet  
different directories DC B-1  
multiple print jobs (Windows XCat) DC  
6-11  
XCat DC 4-9DC 4-11  
XMerge DC 4-11DC 4-13, DC 6-5  
file operator PJ 6-1, PD 1-31  
file server IP D-13  
file server support CM 4-6  
filename extensions  
AS/400 IS 2-12  
configurations using IP 1-5, SO 5-2  
connections SO 4-4SO 4-5  
description SO 4-6  
framing type IP 4-12  
.pg DC A-1  
mainframes IS 2-10  
.tif DC A-1  
requirements IP 4-15  
RS/6000 IS 2-14  
Examine Document command CM 2-6  
Example DC 7-6  
filenames, File of Files  
carriage returns DC 4-13  
space character DC 4-11, DC 4-13  
files  
Excel, Microsoft DC 4-4  
exception pages  
accounting, maintaining CM 9-1CM 9-9  
backing up CM 2-9  
CM = Guide to Configuring and Managing the System  
IS = IPDS Solutions Guide PD = Guide to Using PDL  
Maintenance SJ = Guide to Submitting Jobs from the Client  
DC = Decomposition Service and Tools Guide  
IP = Installation Planning Guide  
PJ = Guide to Managing Print Jobs  
SO = System Overview Guide  
RM -Guide to Performing Routine  
TG = Troubleshooting Guide  
INDEX-10  
Master Index  
 
INDEX  
backing up Xerox CM 2-10  
double byte PD 1-3  
downloading IS 4-10  
error messages PD 1-22  
HP PCL CM 10-3  
NPS log, maintaining CM 9-9  
referenced content  
cleanup PJ 6-7  
placement PJ 6-2  
HP PCL 5 PD 2-5  
shared resource PJ 6-2  
single-use PJ 6-2  
IBM AFP collection IS 4-10IS 4-12  
installing CM 10-2  
referencing PJ 6-3  
Intellifont PD 2-4  
restoring backed-up site CM 2-10  
restoring Xerox CM 2-11  
specifying for printing  
Macintosh LaserWriter driver 8.x SJ  
4-10, SJ 4-22  
list, printing CM 10-8  
listing  
all available CM 10-7  
disk CM 10-6  
printer controller CM 10-6  
loading PD 1-4, PD 1-6  
MICR PD 1-3, PD 2-4, IP 2-7, SO 2-8  
name, specifying PJ 1-2  
PCL IP 2-6, IP 2-7, SO 2-7, SO 2-8  
printer-resident IS 4-10  
sample, printing CM 10-8  
selecting PD 2-4  
size, specifying PJ 1-2  
Type 0 PD 1-3  
installing PD 1-3  
Type 1  
TIFF PJ 6-4  
transferring PJ 6-3  
fill TG 5-4  
fill operator PD 1-24PD 1-26  
FillOrder TIFF tag DC E-1  
filter operator PD 1-21, PD 1-34  
finishing device maximum PJ 1-10  
finishing features  
Windows NT 4.0 (transparent) SJ 5-59  
finishing options IS 5-14  
specifications IS A-4IS A-5  
FirstComeFirstServed attribute PJ 3-13  
Fixed Document Reference file DC 6-15  
FlipSide attribute PJ 1-12  
floating-point operators PD 1-1  
floor leveling IP 6-15  
floppy  
see diskette  
floppy, see diskette  
flushfile TG 5-2  
flushing input data PD 1-21  
FOCA IS 2-4  
font installation commands IP 2-6, SO 2-7  
Font Thicken parameter CM 5-31  
fonts IS 2-3  
installing PD 1-2  
using PD 1-5PD 1-8  
Type 3 PD 1-3  
installing PD 1-3  
user-defined PD 1-4  
using IS 4-10IS 4-13  
Xerox CMC-7 IS 5-12  
Xerox E13B IS 5-12  
fonts, MICR PD 2-4  
fonts, PCL  
sample, printing CM 10-9  
form DC 6-2  
form definitions, (FormDefs) IS 2-2  
form files  
Adobe Type 1 IP 2-6, SO 2-7  
cache size PD 1-33  
Chinese PD 1-3  
ByteCode format DC A-1DC A-2  
TIFFg4 format DC A-1DC A-2  
Form format DC 3-3DC 3-6  
form references  
consistency PD 1-16  
converting IS 4-13  
creating PD 1-6  
default PD 1-3  
applications DC 8-7DC 8-9  
GetTiff macro DC 8-4DC 8-7  
overview DC 8-1  
deleting CM 10-4  
run exec macro DC 8-1DC 8-3  
CM = Guide to Configuring and Managing the System  
DC = Decomposition Service and Tools Guide  
PJ = Guide to Managing Print Jobs RM -Guide to Performing Routine  
SO = System Overview Guide TG = Troubleshooting Guide  
IP = Installation Planning Guide  
IS = IPDS Solutions Guide  
PD = Guide to Using PDL  
Maintenance SJ = Guide to Submitting Jobs from the Client  
INDEX-11  
Master Index  
 
INDEX  
form. DC 6-2  
Format Floppy command CM 2-2  
formatting  
diskette CM 2-2  
FormMerge dialog DC 6-4  
formmerge tool  
FTP login DC 4-12, DC C-1  
FTP PC/TCP SJ 2-2  
full color printing IS 5-2  
full color vs. highlight color PD 1-17  
fuser  
agent IP A-7, SO A-7  
shield IP A-7, SO A-7  
fuser oil, adding RM 3-1  
overview DC 1-4  
SunOS/Solaris DC 6-17  
Windows DC 6-3DC 6-5  
formmrg tool (DOS) DC 6-13  
forms DC 1-2, DC 6-2  
background PJ 1-8, PJ 1-9  
backing up, restoring DC F-1  
color DC 3-1, DC 3-6, DC 5-1  
creating DC 4-2  
G
GDDM (Graphical Data Display Manager) IS  
4-2  
Generate PostScript dialog DC 6-12  
getg4 tool  
DOS DC 9-1DC 9-2  
Decomp Service benefits DC 1-1  
definition DC 3-6  
deleting CM 11-4, DC 7-4  
directory location  
non-default DC B-1  
listing DC 5-3, DC 7-4  
managing CM 11-1  
overview DC 1-4  
SunOS/Solaris DC 9-3  
GetTiff capabilities PJ 6-5  
GetTiff limitations PJ 6-7  
GetTiff macro DC 1-5, DC 8-4DC 8-7  
GetTiff macro, referencing files PJ 6-4PJ  
6-5  
Mask, Form structures DC 3-3DC 3-4  
naming, Novell PJ 2-9  
overlaying variable data  
DOS formmrg tool DC 6-13  
SunOS/Solaris formmerge DC 6-17  
printing controller-resident  
Windows FormMerge DC 6-3DC 6-5  
Windows Reprint DC 6-2DC 6-3  
printing samples CM 11-3  
printing single DC 7-6  
static DC G-6  
gfi directories, removing CM 13-3  
GMC PrintNet IS 4-8  
GOCA (Graphics Object Content  
Architecture IS 2-4  
GOCA (Graphics Object Content  
Architecture) IP 1-8, SO 5-5  
GOCA image resolution IS 4-16  
Golden Print Job masters SJ 2-5  
graphic borders SJ 4-40  
graphical user interface CM 1-1  
graphics  
virtual printer setup DC 3-7  
formulas  
bitmap PD 1-5, PD 1-14  
raster PD 2-3  
Decomp PPM DC D-2  
PPM DC D-2  
vector PD 2-2  
graphics, Windows NT 4.0  
compressing SJ 5-72  
printing in color SJ 5-73  
gray shading  
setcolorscreen TG 5-2TG 5-3  
setscreen TG 5-2TG 5-3  
settransfer function TG 5-3  
transfer function TG 5-3  
gray values, rendering PD 1-27  
Group4Options TIFF tag DC E-1  
Forward Document command PJ 3-5  
Forwarded From attribute PJ 1-12  
Forwarded To attribute PJ 1-12  
FrameMaker software, image quality SJ  
4-40  
frames  
static data DC 4-7  
variable data DC 4-3  
framing type, Ethernet IP 4-12  
CM = Guide to Configuring and Managing the System  
IS = IPDS Solutions Guide PD = Guide to Using PDL  
Maintenance SJ = Guide to Submitting Jobs from the Client  
DC = Decomposition Service and Tools Guide  
IP = Installation Planning Guide  
PJ = Guide to Managing Print Jobs  
SO = System Overview Guide  
RM -Guide to Performing Routine  
TG = Troubleshooting Guide  
INDEX-12  
Master Index  
 
INDEX  
H
Windows NT 4.0 (transparent) SJ  
5-69  
process, Macintosh LaserWriter driver  
8.x SJ 4-39  
Quick Print for Windows NT 4.0  
changing full color to highlight color  
SJ 6-19  
halftoning PD 1-12, PD 1-27  
Halt System command CM 3-3  
handwritten test masters PD 1-1PD 1-2  
hard disk, Xerox Client Software  
requirements TG 2-2  
hardware IS 3-1  
components IP 5-6  
overview SJ 6-18SJ 6-20  
selecting color mismatch action SJ  
6-19, SJ 6-20  
network options SO 4-4SO 4-5  
printer controller, installing IP 8-3  
specifications IP 5-6, IP 6-18  
supported IP 1-11IP 1-12  
HCF IP 3-14, SO 3-15  
specifying color SJ 6-19  
Windows NT 4.0 (transparent)  
overview SJ 5-67SJ 5-71  
selecting SJ 5-68  
HCS IP 3-16, SO 3-17  
problems TG 6-4  
selecting color mismatch action SJ  
5-69  
HCS, see High Capacity Stacker  
HCSS IP 3-18, SO 3-18  
problems TG 6-4  
HCSS, see High Capacity Stacker Stapler  
HCU (Host Control Unit) IS 3-1  
header pages, suppressing PJ 1-11  
heat dissipation IP 6-18  
Held List PJ 3-3  
selecting extraction color SJ 5-69  
selecting rendering algorithm SJ 5-70  
highlight color mismatch attribute PJ 1-14  
highlight color vs. full color PD 1-17  
HighlightColor attribute PJ 1-13  
HighlightColorRendering attribute PJ 1-13,  
PJ 1-14PJ 1-15  
Hewlett-Packard  
Hold attribute PJ 1-15  
PCL fonts IP 2-6, IP 2-7, SO 2-7, SO 2-8  
High Capacity Stacker (HCS) RM 2-2  
unloading RM 2-3  
High Capacity Stacker Stapler (HCSS) RM  
2-6, RM 2-7  
high-capacity feeder IP 3-14, SO 3-15  
high-capacity stacker IP 3-16, SO 3-17  
problems TG 6-4  
Hold Documents command PJ 3-6  
Hold Reason attribute PJ 1-15  
holding print jobs PJ 3-3  
HorizontalImageShift attribute PJ 1-15  
HorizontalImageShiftForBack attribute PJ  
1-15  
host ID  
showing CM 2-13  
high-capacity stacker stapler IP 3-18, SO  
3-18  
hostname attribute PJ 3-6  
HP PCL 5 fonts PD 2-5  
problems TG 6-4  
HP PCL fonts, installing CM 10-3  
High-Capacity Stitcher/Stacker PJ 5-8  
highlight color DC A-2, IP 6-18  
mapping PJ 1-16  
I
IBM AFP Font Collection IS 4-2  
IBM AFP Group 3 page printer SO 5-1  
IBM AFP Windows Printer Driver IS 4-3  
IBM Group 3 compatible printers IS 1-1  
IBM Open Blueprint architecture IS 2-4  
IBM, outline fonts SO 5-7  
ICC profile SJ 2-21  
ID number, document PJ 1-30  
IdleTime Dictionary operators PD 1-10  
matching options  
Macintosh AdobePS driver SJ 4-28  
Macintosh LaserWriter 8.x driver SJ  
4-16  
mismatch with loaded ink color  
Quick Print for Windows NT 4.0 SJ  
6-19, SJ 6-20  
results compared SJ 3-37  
CM = Guide to Configuring and Managing the System  
IS = IPDS Solutions Guide PD = Guide to Using PDL  
Maintenance SJ = Guide to Submitting Jobs from the Client  
DC = Decomposition Service and Tools Guide  
IP = Installation Planning Guide  
PJ = Guide to Managing Print Jobs  
SO = System Overview Guide  
RM -Guide to Performing Routine  
TG = Troubleshooting Guide  
INDEX-13  
Master Index  
 
INDEX  
IEEE  
positioning (Quick Print for Windows NT  
4.0) SJ 6-12  
802.3 IP 1-10, IP 4-15  
802.5 IP 1-10  
print quality IS 4-16  
IEEE 802.3 IP 4-15  
illegal characters, ignoring PD 1-18PD 1-20  
image  
PSF conversion IS 4-16  
quality considerations  
Macintosh LaserWriter driver 8.x SJ  
4-40  
area SO 1-6  
characteristics PD 1-15  
coordinates, transforming PD 1-40  
data  
quality, maintaining PJ 1-14  
TIFF PJ 6-4  
images, GOCA IS 4-16  
order, optimizing PD 1-35PD 1-40  
embedding PD 1-34, PD 1-43  
orientation PD 1-36  
ImageWidth TIFF tag DC E-1  
implementation limits PD 1-30  
ineligible documents PJ 3-10  
Infoprint Manager  
overlaying DC G-4  
post-enhancement PD 1-14  
pre-enhancement PD 1-14  
quality SO 1-6  
quality, maintaining PD 1-12PD 1-16,  
PD 2-2PD 2-3  
AIX IP E-5, IP F-30  
Windows 2000 IP E-4, IP F-29  
Windows NT IP E-4, IP F-29  
initgraphics operator PJ 5-2  
ink, replacing RM 4-2  
rendering PD 1-37  
inks RM 4-1  
rotating PD 1-36PD 1-37  
scaling PD 1-40PD 1-43  
scanning PD 1-35PD 1-40  
image editors DC 9-1  
Image Lift printing DC G-3  
image shift  
input group migration, IPS PJ 2-1, PJ 2-11  
input profiles CM 6-1CM 6-6  
input resolution IS 4-13  
input trays  
preparing IS 6-1  
specifications IS A-3  
horizontal  
insertion order PJ 3-1  
Quick Print for Windows NT 4.0 SJ  
6-12  
Windows NT 4.0 (transparent) SJ  
5-58  
Install Feature License command CM 2-16  
Install FlexLicense from Floppy command  
CM 2-17  
Install Fonts from CDROM command CM  
10-2  
vertical  
Quick Print for Windows NT 4.0 SJ  
6-12  
Windows NT 4.0 (transparent) SJ  
5-58  
Install Fonts from Floppy command CM 10-2  
Install License command (obsolete) CM 2-18  
Install PCL Fonts from Floppy command CM  
10-3  
image shifting, mixed plex PJ 7-8  
ImageLength TIFF tag DC E-1  
imager parameters CM 5-29CM 5-32  
imager parameters, PCL CM 5-33CM 5-35  
images IS 4-16  
Install Remote Update command CM 2-7  
Install Update from CDROM command CM  
2-7  
Install Update from Floppy command CM 2-7  
installation  
ensuring proper printing  
GetTiff macro DC 8-4  
run exec macro DC 8-2  
overlayed variable data DC 5-1DC 5-4,  
DC 7-2  
hardware IP 8-1  
network checklist IP 4-8IP 4-14  
planning checklist IP 4-5IP 4-7  
preparation IP 4-1IP 4-14  
process IP 8-1IP 8-2  
CM = Guide to Configuring and Managing the System  
DC = Decomposition Service and Tools Guide  
PJ = Guide to Managing Print Jobs RM -Guide to Performing Routine  
SO = System Overview Guide TG = Troubleshooting Guide  
IP = Installation Planning Guide  
IS = IPDS Solutions Guide  
PD = Guide to Using PDL  
Maintenance SJ = Guide to Submitting Jobs from the Client  
INDEX-14  
Master Index  
 
INDEX  
timeframes IP 4-5  
Xerox responsibilities IP 4-2  
installing  
IPDS input resolution PJ 1-16  
IPDS printing  
starting PJ 3-15  
command sets PD 3-4  
Decomposition Service Tools SJ 2-6, SJ  
2-15  
stopping PJ 3-15  
IPDS virtual printer PJ 2-1  
IPDSContinuousEmulation IS 4-18  
IPP IP 1-4, SO 1-4  
fonts CM 10-2  
NFS CM 13-1  
PostScript drivers  
IPP, see Internet Printing Protocol  
IPS input group migration PJ 2-1, PJ 2-11  
IPX internal network number, specifying IP  
4-12  
Windows NT 4.0 (transparent) SJ  
5-41SJ 5-47  
PPD file SJ 2-5, SJ 2-15  
system, Windows NT 4.0 SJ 5-41SJ  
5-47  
ISIS products IS 4-6IS 4-7  
ISOLatin1Encoding operator PD 1-8  
Type 0 fonts PD 1-3  
J
Type 1 fonts PD 1-2  
JES2  
Type 3 fonts PD 1-3  
FSS statement parameters IP F-3IP  
verifying  
F-5  
PC-DOS SJ 2-5  
Initialization Dataset commands example  
UNIX SJ 2-12  
IP F-5  
XDOD/DigiPath CM 13-2  
Xerox Client Software SJ 2-10  
installing Decomposition Service  
DOS DC 2-2  
printer definitions IP E-1  
JES3  
configuring IP F-5  
FSS statement parameters IP F-6IP  
overview DC 2-1  
F-8  
Windows DC 2-1  
insurance  
initialization dataset commands example  
IP F-8  
examples IS 1-3  
job  
insurance quote customized DC 1-4  
Intellifont fonts PD 2-4  
Internet Printing Protocol (IPP) SJ 7-1  
interrupting print jobs PJ 3-14  
invisible strokes, setlinewidth TG 5-4  
IOCA (Image Object Content Architecture)  
IS 2-5, IP 1-8, SO 5-5  
IOCA colors SO 5-7  
status  
command SO 4-6  
feedback SO 4-5SO 4-6  
submission  
methods SO 4-2SO 4-5  
job description ticket (JDT) PD 3-2  
job IDs  
resetting CM 2-12  
IOCA Replicate and Trim SO 5-5  
IOT (input/output terminal) IS 3-2  
IP  
Job Message sheet PJ 1-11  
job message, banner page  
Quick Print for Windows NT 4.0 SJ 6-13–  
SJ 6-15  
address IP 4-8  
broadcast address IP 4-9  
Netmask IP 4-9  
IPDS PJ 7-1, IS 2-5, IS 6-2  
channel switching PJ 3-15  
simplex PJ 8-3  
Windows NT 4.0 (transparent) SJ 5-61  
job names, Quick Print for Windows NT 4.0  
SJ 6-24  
job notes  
Quick Print for Windows NT 4.0 SJ 6-13–  
SJ 6-14  
IPDS data streams IP 1-8, SO 5-1, SO 5-5  
CM = Guide to Configuring and Managing the System  
DC = Decomposition Service and Tools Guide  
PJ = Guide to Managing Print Jobs RM -Guide to Performing Routine  
SO = System Overview Guide TG = Troubleshooting Guide  
IP = Installation Planning Guide  
IS = IPDS Solutions Guide  
PD = Guide to Using PDL  
Maintenance SJ = Guide to Submitting Jobs from the Client  
INDEX-15  
Master Index  
 
INDEX  
Windows NT 4.0 (transparent) SJ 5-59–  
reordering PJ 3-2  
scheduling PJ 3-2  
sets  
delineating PJ 5-2  
stapling PJ 5-10  
stapling runs PJ 5-10  
stapling, multiple PJ 5-3  
starting PJ 3-13  
SJ 5-61  
Job Pool Manager (JPM) PJ 3-2  
job processing  
stopping and starting CM 3-5  
job sizes PJ 3-1  
job status  
determining, platforms compared SJ 1-7  
methods SJ 1-6  
stopping PJ 3-14  
telnet connections SJ 1-6  
job tickets  
submitting PJ 4-2  
ticket PJ 4-2  
Macintosh, AdobePS driver SJ 4-34  
Quick Print for Windows NT 4.0  
generic SJ 6-24  
Jog command PJ 5-10PJ 5-11  
JPEG compressed IOCA IS 2-5  
job note summary information SJ  
6-14  
loading SJ 6-4SJ 6-5  
resetting to defaults SJ 6-8  
saving SJ 6-6  
K
keyboard IP 2-5, IP 5-6, SO 2-6  
key-value pairs  
availability, determining PJ 5-2  
device dictionary PJ 5-2  
multiple calls PJ 5-2  
Kill command CM 3-6  
Windows NT 4.0 (transparent)  
opening SJ 5-51SJ 5-52  
resetting SJ 5-55SJ 5-56  
saving SJ 5-53SJ 5-54  
jobs  
L
labels  
arrival PJ 3-2  
canceling PJ 3-3  
selecting IP A-3, SO A-3  
LAN  
constructing PJ 5-1  
copying PJ 5-11  
delivery order PJ 5-8  
dividing PJ 5-1  
Ethernet SO 4-6  
Token Ring SO 4-6  
LAN network number, specifying IP 4-12  
LaserWriter PD 1-22  
LaserWriter drivers  
forwarding PJ 3-3  
holding PJ 3-3  
version 7.x  
insertion order PJ 3-1  
interrupting PJ 3-14  
listing PJ 3-3  
selecting SJ 4-2  
submitting print jobs SJ 4-9SJ 4-10  
version 8.x  
Macintosh PJ 4-2  
selecting SJ 4-3  
managing large PJ 5-8  
Novell PJ 3-16  
parameters, PSERVER PJ 3-17  
print order PJ 3-1  
prioritizing PJ 3-1  
priority PJ 3-1  
promoting PJ 3-11  
queues  
remote printer PJ 3-18  
releasing PJ 3-3, PJ 3-11PJ 3-12  
submitting print jobs SJ 4-10SJ 4-40  
LCDS commands, converting PD 3-2  
Level 2 operators PD 1-21  
leveling, floor IP 6-15  
license, software IP 8-4, SO 1-5  
license, VIPP PD 3-3  
licenses  
diagnostic CM 2-15  
displaying remaining days CM 2-17  
installing feature CM 2-16  
CM = Guide to Configuring and Managing the System  
DC = Decomposition Service and Tools Guide  
PJ = Guide to Managing Print Jobs RM -Guide to Performing Routine  
SO = System Overview Guide TG = Troubleshooting Guide  
IP = Installation Planning Guide  
IS = IPDS Solutions Guide  
PD = Guide to Using PDL  
Maintenance SJ = Guide to Submitting Jobs from the Client  
INDEX-16  
Master Index  
 
INDEX  
installing from diskette CM 2-17  
showing status CM 2-17  
licenses, software CM 2-15  
licensing commands CM 2-15CM 2-18  
limit  
listq command SJ 1-7, SJ 3-16  
lists, job  
Active PJ 3-7  
Held PJ 3-7  
loaded font command set IS 3-7  
loading fonts PD 1-4, PD 1-6  
loading job tickets  
path PD 1-31  
storage object size PD 1-33  
virtual memory PD 1-31  
Quick Print for Windows NT 4.0 SJ 6-4–  
SJ 6-5  
limitations, color IS C-1  
limitations, stock SO 1-7  
limitcheck error PD 1-31  
logging in CM 4-2, CM 4-6  
logos PD 1-5  
line mode PD 3-2  
logs  
line mode extension PD 3-3PD 3-4  
lines and borders, adding color IS 5-8  
lines, zero-width PD 1-24  
List CDROM Fonts command CM 10-6  
List Color Calibrations command CM 15-10  
List Documents command DC D-9, PJ 3-7–  
PJ 3-10  
List Executives command CM 1-4, CM 8-8  
List Files on CDROM command CM 2-8  
List Floppy Fonts command CM 10-6  
List Fonts command CM 10-6, CM 10-7  
List Forms command CM 11-2  
performance measurements DC D-7  
syntax and example DC 7-4  
verifying forms DC 5-3  
copying to floppy CM 9-11  
deleting CM 9-12  
displaying CM 9-10  
listing CM 9-10  
printing CM 9-13  
lpc command (UNIX) SJ 3-35  
lpd commands IP 4-10  
lpq command SO 4-6  
determining job status SJ 1-7  
DOS SJ 3-31  
UNIX SJ 3-32  
lpr  
print utilities, enabling SJ 2-17SJ 2-19  
security option, enabling CM 12-5  
Solaris SJ 2-18  
List Logs command CM 9-10  
List Options command CM 5-28  
List Sample Documents command CM 8-5  
List Virtual Printers PJ 2-5  
List Virtual Printers command DC 7-5, PJ 2-5  
List Volumes command CM 8-2  
listing  
SunOS SJ 2-17  
lpr command SJ 3-19, SO 4-6  
color mismatch results SJ 3-37  
overview SJ 1-4  
syntax DC 5-1  
virtual printer assignment DC 5-5  
lpr commands IP 4-10  
lprm command SJ 3-33  
lpstat command SJ 1-6  
LU 6.2 connection IS 2-12  
default options CM 5-28  
files on CD ROM CM 2-8  
files on diskette CM 2-3  
files on tape CM 2-5  
fonts  
M
disk CM 10-8  
printer controller CM 10-8  
forms DC 5-3, DC 7-4  
logs CM 9-10  
virtual printers DC 7-5  
Macintosh client software SJ 2-7  
Macintosh drivers  
highlight color printing SJ 4-39  
image quality SJ 4-40  
monitoring and controlling printing SJ  
4-39  
listing commands CM 1-1  
listjob command SJ 1-7, SJ 3-13  
selecting AdobePS driver SJ 4-6SJ 4-9  
CM = Guide to Configuring and Managing the System  
DC = Decomposition Service and Tools Guide  
PJ = Guide to Managing Print Jobs RM -Guide to Performing Routine  
SO = System Overview Guide TG = Troubleshooting Guide  
IP = Installation Planning Guide  
IS = IPDS Solutions Guide  
PD = Guide to Using PDL  
Maintenance SJ = Guide to Submitting Jobs from the Client  
INDEX-17  
Master Index  
 
INDEX  
selecting LaserWriter driver  
matching media PJ 4-1, PJ 4-5  
math operators PD 1-1  
MAU (modular access unit) IS 2-11  
maximum  
version 7.x SJ 4-1SJ 4-2  
version 8.x SJ 4-3SJ 4-6  
submitting print jobs  
AdobePS driver SJ 4-22SJ 4-38  
Laser 7.x driver SJ 4-9SJ 4-10  
LaserWriter 8.x driver SJ 4-10SJ  
4-40  
retry number PJ 1-21  
Maximum File Locks  
setting CM 4-6  
measuring performanceDC 7-7, DC D-1DC  
D-11  
Macintosh jobs, submitting PJ 4-2  
Macintosh platforms DC 1-5  
macro, GetTiff PJ 6-4PJ 6-5  
macros  
media  
criteria PJ 4-1  
default values PJ 4-1  
match  
GetTiff DC 1-5, DC 8-4DC 8-7  
listed DC 1-5  
complete PJ 4-6  
run exec DC 1-5, DC 8-1DC 8-3  
magnetic ink character recognition see  
MICR  
none PJ 4-6  
partial PJ 4-6  
tolerance PJ 4-6  
Mail Merge Helper dialog DC 4-4DC 4-6  
mainframe  
AFP data flows IS D-1IS D-5  
connections IS 2-7IS 2-11  
maintaining pictorial quality PJ 1-14  
maintenance  
specifications  
dynamic PJ 4-5PJ 4-6  
static PJ 4-1  
submitter PJ 4-2  
static, determining PJ 4-2  
virtual printer PJ 4-3  
weight PJ 4-5  
ongoing IP 8-5  
routine IP 8-5  
Media attribute PJ 1-17  
media list PJ 4-3  
media selection precedence, PCL PD 2-13  
media setting default CM 5-7  
media, determining specifications DC 6-8,  
DC 7-8  
medical center example DC 5-2DC 5-4  
memory, virtual PD 1-20  
merge  
commands, inserting DC G-7  
document, printing DC G-8  
Merge Pages dialog DC 6-7  
merging files DC 4-8  
messages  
maintenance services RM 8-1RM 8-6  
man pages SJ 2-12SJ 2-13  
managing  
long jobs PJ 5-8  
print queue, Novell Netware PJ 3-16  
virtual printers PJ 2-1  
Managing IPDS jobs PJ 8-1  
manufacturing application, example IS 1-6  
map color  
highlight color algorithm SJ 4-16, SJ 4-28  
print and lpr command color match/  
mismatch results SJ 3-37  
mapping user coordinates PD 1-1PD 1-2  
mapping, color  
automatic rendering PJ 1-15  
highlight PJ 1-14PJ 1-15  
MarkForm facility IS 5-10  
Mask format DC 3-3DC 3-6  
master documents DC 4-1  
master, PostScript PD 1-27  
masters, multiple PJ 6-1  
Client Software installation TG 2-2  
font substitution error PD 1-22  
stdout PD 1-22  
telnet CM 1-4  
meter, billing  
reading IP 8-6  
reporting IP 8-6  
MICR IS 5-12  
CM = Guide to Configuring and Managing the System  
DC = Decomposition Service and Tools Guide  
PJ = Guide to Managing Print Jobs RM -Guide to Performing Routine  
SO = System Overview Guide TG = Troubleshooting Guide  
IP = Installation Planning Guide  
IS = IPDS Solutions Guide  
PD = Guide to Using PDL  
Maintenance SJ = Guide to Submitting Jobs from the Client  
INDEX-18  
Master Index  
 
INDEX  
applications IS 1-2, IS 5-11IS 5-14  
fonts  
clearing from memory CM 14-6  
deleting CM 14-6  
fonts for NPS CM 14-5  
resources IS 5-13  
security CM 14-6, IS 5-14  
tasks for NPS CM 14-5  
Xerox Check Performance Guarantee IS  
5-11  
multiple  
copies PJ 5-11  
jobs, removing reference files PJ 6-8  
masters PJ 6-1  
setpagedevice calls PJ 5-1  
multiple master font PD 1-4  
MultiSet  
copying PJ 5-11  
duplexing PJ 5-11  
EarlyStaple option PJ 5-9  
Jog command PJ 5-10PJ 5-11  
minimizing decomposition time PJ 5-13  
setpagedevice entries PJ 5-2  
specifying multiple copies PJ 5-11  
MVS  
channel attachment IP E-1IP E-3  
TCP/IP connection IP F-1IP F-20  
MVS print flow IS D-1  
Xerox CMC-7 font IS 5-12  
Xerox E13B font IS 5-12  
MICR font floppy PD 1-3, PD 2-4  
MICR fonts IP 2-7, SO 2-8  
MICRMode attribute PJ 1-17  
Microsoft Word  
data merge example DC G-5  
inserting merge commands DC G-7  
migrating applications IS 4-1  
mixed plex PJ 7-1  
N
counting pages PJ 7-4  
dynamic plex changes PJ 7-2  
image shifting PJ 7-8  
names  
document PJ 1-19  
referenced content files PJ 6-1PJ 6-2  
sender PJ 1-11  
introduction PJ 7-1  
other attributes PJ 7-9  
side selection for PCL PJ 7-7  
static plex changes PJ 7-3  
mixed plex, simulated PostScript PD 1-21  
mixing plex types PJ 5-12  
MO:DCA-P (Mixed Object Document  
Content Architecture for Presentation  
IP 1-8, SO 5-5  
shared resource files PJ 6-2  
single-use files PJ 6-2  
virtual printer PJ 1-19, PJ 2-2  
native mode PD 3-1, PD 3-2  
Netware PJ 3-16  
NetWare servers, Novell, attaching printers  
Quick Print for Windows NT 4.0 SJ 6-29–  
SJ 6-35  
MODCA data streams IS 2-5  
modem  
network  
AppleTalk IP 4-10  
connecting CM 2-30  
communication  
disabling CM 2-31  
enable TG 1-2  
enabling CM 2-29  
overview SO 4-3SO 4-5  
protocols SO 4-3SO 4-5  
communications SO 4-4SO 4-5  
configuration IP 1-11  
Ethernet IP 1-9  
switch settings CM 2-30  
monitor IP 5-6  
monitoring printing, LaserWriter version 8.x  
SJ 4-39  
Mount CDROM command CM 12-2, CM  
12-3  
Mount Floppy command CM 12-3  
mouse IP 2-5, IP 5-6  
installation checklist IP 4-8IP 4-14  
multiple connectivity SO 4-7  
Novell IP 4-11  
Token Ring IP 1-10, IP 8-1  
network configurations  
AS/400 IP F-21  
CM = Guide to Configuring and Managing the System  
DC = Decomposition Service and Tools Guide  
PJ = Guide to Managing Print Jobs RM -Guide to Performing Routine  
SO = System Overview Guide TG = Troubleshooting Guide  
IP = Installation Planning Guide  
IS = IPDS Solutions Guide  
PD = Guide to Using PDL  
Maintenance SJ = Guide to Submitting Jobs from the Client  
INDEX-19  
Master Index  
 
INDEX  
MVS IP F-2  
network interface requirements IP 4-14  
networks, communicating SJ 1-5SJ 1-6  
newsletters, mailers, forms, pricing lists DC  
1-2  
OffsetPerCopy attribute PJ 1-18  
OffsetPerJob attribute PJ 1-18  
offsetting sets PJ 5-11  
OGL (Overlay Generation Language) IS 4-2  
Olympics, 1996  
NFS  
Background Form use DC 5-1  
Decomp Service use DC 1-2  
online and offline  
configuring CM 13-2  
installing CM 13-1  
no media match PJ 4-6  
nonstandard definitions PD 1-11PD 1-12  
Not Ready Signals on the IPDS Host PJ 8-4  
Notify flag PJ 3-18  
switching IPDS channel PJ 3-15  
OPC (Obtain Printer Characteristics)  
command IS 3-9  
opening job tickets  
Novell  
Windows NT 4.0 (transparent) SJ 5-51–  
SJ 5-52  
banner pages PJ 3-18  
data transfer PJ 3-16  
operating systems  
forms PJ 2-9  
jobs, queuing PJ 3-16  
PCONSOLE PJ 3-16  
print server PJ 3-17  
requirements SO 4-4SO 4-5  
operating systems supported IP 1-5, IP  
1-11IP 1-12, SO 5-1  
operator  
PSERVER PJ 3-17  
remote printer PJ 3-18  
RPRINTER PJ 3-18  
accessing commands CM 1-2  
changing password CM 1-3  
operator training IP 4-3, RM 8-2  
operators  
Novell implementation, troubleshooting TG  
3-3  
#copies PD 1-9  
Novell NetWare  
charpath PD 1-21  
connectivity requirements IP 4-14  
information IP 4-11  
data placement PD 3-2PD 3-3  
dictionary  
installation information IP 4-11IP 4-13  
PCONSOLE IP D-2  
Execution PD 1-11  
IdleTime PD 1-10  
print queues IP D-2, IP D-11, IP D-13  
PSERVER IP 4-11, IP D-3IP D-5, IP  
D-7IP D-11, IP D-13  
Printer PD 1-10PD 1-11  
Server PD 1-9  
Status PD 1-10  
remote printer (RPRINTER) IP 4-12, IP  
D-5IP D-9, IP D-11IP D-14  
virtual printers IP 4-12, IP D-5, IP D-11,  
IP D-13  
System PD 1-8  
User PD 1-8PD 1-9  
eexec PD 1-8  
exitserver PD 1-20, PD 1-22  
file PD 1-31  
fill PD 1-24PD 1-26  
filter PD 1-21, PD 1-34  
floating-point PD 1-1  
ISOLatin1Encoding PD 1-8  
obsolete PD 1-33  
Novell network CM 4-1  
NPS log files, maintaining CM 9-9  
number  
EndOfSet command PJ 5-3PJ 5-4  
O
ObjectSize attribute PJ 1-18  
OCA colors SO 5-6  
OCAs (Object Content Architectures) IS 2-4  
offset stacking facility IS 5-10  
pathforall PD 1-33  
PostScript Level 2 PD 1-21  
rotate PD 1-37, PD 1-41  
scale PD 1-40  
CM = Guide to Configuring and Managing the System  
DC = Decomposition Service and Tools Guide  
PJ = Guide to Managing Print Jobs RM -Guide to Performing Routine  
SO = System Overview Guide TG = Troubleshooting Guide  
IP = Installation Planning Guide  
IS = IPDS Solutions Guide  
PD = Guide to Using PDL  
Maintenance SJ = Guide to Submitting Jobs from the Client  
INDEX-20  
Master Index  
 
INDEX  
SetCacheDevice PD 1-32  
P
setfileposition PD 1-21  
setflat PD 1-25  
setgray PD 1-28  
setlinewidth PD 1-23, PD 1-24  
setscreen PD 1-32  
padding, bounding box PD 1-32  
page definitions (PageDefs) IS 2-2  
page definitions, modifying Quick Print for  
Windows NT 4.0 SJ 6-22  
page description language, see PDL  
page device dictionary PJ 5-2, PJ 5-8  
page numbers, run exec macro DC 8-2  
page orientation, specifying  
Windows NT 4.0 (transparent) SJ 5-57  
page origins  
modifying for AFP IS 4-19  
page ranges, specifying  
Quick Print for Windows NT 4.0 SJ 6-12  
Windows NT 4.0 (transparent) SJ 5-57  
page segment command set IS 3-7  
page segments IS 2-3, IS 4-15  
Page Size command, PCL PD 2-12  
pagedevice PJ 5-12  
stroke PD 1-23PD 1-24  
operatorseq string PJ 6-3  
optimized scaling PD 1-41  
options  
default, listing CM 5-28  
order  
insertion PJ 3-1  
page PJ 4-4  
print PJ 3-1  
stapling PJ 5-8  
ordering supplies IP A-14IP A-15, SO  
A-14SO A-15  
orientation PD 1-32, PD 1-36  
Orientation attribute PJ 1-18  
Orientation TIFF tag DC E-1  
orphan data files, removing CM 12-6  
OS/390, see MVS  
PageOrder attribute PJ 1-18, PJ 4-4  
PageRange attribue PJ 1-19  
pages  
blank  
OS/400 print flow IS D-5  
outlets, power configurations IP 5-2, IP 6-2  
outline fonts IS 4-12, SO 5-7  
output limit, List Documents command PJ  
3-7  
XCat DC 6-10  
XMerge DC 6-5, DC 6-7, DC 6-14, DC  
6-18  
specifying, cycling method DC 5-5DC  
5-8  
output pages PJ 1-9  
superimposing multiple  
output profiles CM 6-1CM 6-6  
output resolution IS 4-13  
output trays  
specifications IS A-4IS A-5  
OutputBin attribute PJ 1-18, PJ 3-9  
overlay command set IS 3-7  
overlaying  
GetTiff macro DC 8-4, DC 8-5DC 8-7  
run exec macro DC 8-2  
XMerge caveats DC 6-5, DC 6-7, DC  
6-14, DC 6-18  
pages per minute (PPM) DC D-1  
PagesDone attribue PJ 1-19  
PagesPerCopy attribue PJ 1-19  
paper  
images DC G-4  
overlaying TIFF images PJ 6-4  
overlays IS 2-3, IS 4-15  
adding color IS 5-7  
characteristics IP A-3, SO A-3  
conditioning IP A-6IP A-7, SO A-6SO  
A-7  
adding color shading IS 5-9  
overstrike support SO 5-6  
overview IS 1-1IS 1-9  
processing IS 3-2  
guidelines for loading RM 1-1  
loading tray 4 RM 1-5  
loading trays 1, 2, 3 RM 1-2  
recommended weight, grade IP A-2, SO  
A-2  
size IP A-2, SO A-2  
CM = Guide to Configuring and Managing the System  
DC = Decomposition Service and Tools Guide  
PJ = Guide to Managing Print Jobs RM -Guide to Performing Routine  
SO = System Overview Guide TG = Troubleshooting Guide  
IP = Installation Planning Guide  
IS = IPDS Solutions Guide  
PD = Guide to Using PDL  
Maintenance SJ = Guide to Submitting Jobs from the Client  
INDEX-21  
Master Index  
 
INDEX  
storing IP A-5, SO A-5  
changing operator CM 1-3  
password, Superuser IP 4-9  
passwords  
types TG 4-1  
weight conversion RM 1-9  
weight, specifying PJ 4-5  
creating File of Files DC 4-9DC 4-11,  
DC 4-11DC 4-12  
paper color  
Quick Print for Windows NT 4.0 SJ 6-16,  
SJ 6-17  
FTP default DC 4-12  
path limits PD 1-31  
Windows NT 4.0 (transparent) SJ 5-64  
paper size  
pathforall operator PD 1-33  
pattern listing, creating File of Files DC 4-11  
PC operating systems, tools supported DC  
1-5  
Quick Print for Windows NT 4.0 SJ 6-24  
Windows NT 4.0 (transparent) SJ 5-63  
paper source  
PC-DOS workstations, setting up SJ 2-2SJ  
2-6  
PCL IS 6-2  
Macintosh LaserWriter driver 7.x SJ 4-10  
Paper Source command, implementing PD  
2-10  
drivers for 5c PD 2-17  
Paper Source command, PCL PD 2-12  
paper stock  
PCL 5  
coding recommendations PD 2-14  
resolution PD 2-2PD 2-3  
PCL 5c  
specifying  
DOS xcat DC 6-15  
Quick Print for Windows NT 4.0 SJ  
6-15SJ 6-17  
SunOS/Solaris formmerge DC 6-19  
Windows NT 4.0 (transparent) SJ  
5-61SJ 5-64  
coding recommendations PD 2-16  
PCL 5c support PD 2-15  
PCL commands, supported PD 2-6  
PCL Copy command PD 2-8PD 2-9  
PCL data streams SO 5-1  
PCL fonts IP 2-6, IP 2-7, SO 2-7, SO 2-8  
PCL fonts, installing CM 10-3  
PCL mixed plex side selection PJ 7-7  
PCL Paper Source command PD 2-12  
PCL parameters  
Windows XCat DC 6-8, DC 6-11  
paper trays RM 1-1  
paper type  
Quick Print for Windows NT 4.0 SJ 6-16  
Windows NT 4.0 (transparent) SJ 5-63  
paper weight  
changing CM 5-36  
Quick Print for Windows NT 4.0 SJ 6-16  
Windows NT 4.0 (transparent) SJ 5-58  
paper, drilled  
restoring default CM 5-40, CM 5-41  
setting CM 5-36  
PCL support  
Quick Print for Windows NT 4.0 SJ 6-16  
Windows NT 4.0 (transparent) SJ 5-64  
Papyrus Document System, see ISIS  
products  
parameters, PSERVER PJ 3-17  
parentheses ()  
DOS xcat DC 6-15  
SunOS/Solaris formmerge DC 6-19  
parser, IPDS  
full color PD 2-1  
highlight color PD 2-1  
monochrome PD 2-1  
PCL symbol sets CM 5-38  
PCL tray assignment PD 2-12  
PCONSOLE CM 4-4, PJ 3-16  
PCONSOLE, Novell IP D-2  
PDL SO 4-3  
displaying code CM 2-6  
PDL code, displaying CM 2-6  
pecifying Colors for IPDS Jobs PJ 8-5  
pel fonts IS 4-12  
restarting CM 3-6  
partial media match PJ 4-6  
password  
changing administrator CM 1-3  
perforated paper IP A-4, SO A-4  
CM = Guide to Configuring and Managing the System  
DC = Decomposition Service and Tools Guide  
PJ = Guide to Managing Print Jobs RM -Guide to Performing Routine  
SO = System Overview Guide TG = Troubleshooting Guide  
IP = Installation Planning Guide  
IS = IPDS Solutions Guide  
PD = Guide to Using PDL  
Maintenance SJ = Guide to Submitting Jobs from the Client  
INDEX-22  
Master Index  
 
INDEX  
performance  
Type 1 PD 1-2PD 1-6  
GetTiff macro PJ 6-4PJ 6-5  
jobs, delimiting PD 1-17PD 1-18  
level 2 PJ 1-11  
Level 2 operators PD 1-21  
master PD 1-27  
factors affecting PJ 9-1  
improving GetTiff macro DC 8-5  
measuring DC 7-7, DC D-1DC D-11, PJ  
9-3  
Personality Profile parameters CM 6-3  
Personalized documents DC 1-2, DC 1-3  
personnel, training IP 4-4  
Photometric-Interpretation TIFF tag DC E-1  
Photoshop, Adobe DC 9-1  
pictorial, highlight color rendering PJ 1-14  
pixel doubling IS 4-17  
masters, referencing files PJ 6-3  
Printer Controller operations PD 1-22  
printer description, see PPD  
setpagedevice operator PJ 4-2  
virtual memory PD 1-20, PD 1-31  
PostScript data streams SO 5-1  
PostScript drivers, Microsoft Word DC 4-2  
PostScript files  
pixels  
distribution attributes  
Tiff/G4, ByteCode compared DC 3-2  
values DC 3-1  
coding form references  
applications DC 8-7DC 8-8  
GetTiff macro DC 8-4DC 8-7  
run exec macro DC 8-1DC 8-3  
generating  
GetTiff macro DC 8-4, DC 8-5  
Mask, Form formats DC 3-3DC 3-4  
pixels, painting PD 1-23PD 1-26  
PJL, commands PD 2-6  
placement, referenced files PJ 6-2  
PlanarConfiguration TIFF tag DC E-1  
planning checklist IP 4-5IP 4-7  
platforms  
DOS formmrg tool DC 6-13  
DOS reprint tool DC 6-13  
DOS xcat tool DC 6-15  
SunOS/Solaris FormMerge DC 6-17  
Windows FormMerge DC 6-3DC 6-5  
Windows Reprint DC 6-2DC 6-3  
Windows XCat DC 6-11, DC 6-12  
PostScript fonts IP 2-6, SO 2-7  
PostScript Printer Description file, see PPD  
file  
job status capability SJ 1-7  
job submission requirements SJ 1-5SJ  
1-6  
platforms, tools supported DC 1-5  
plex  
attribute PJ 1-19  
IPDS PJ 8-3  
PostScript, proprietary extensions TG 5-2  
power  
Plex attribute PJ 5-12  
requirements IP 5-1IP 5-3, IP 6-1, IP  
6-18  
power outage  
powering off and on after CM 3-5  
power saver mode DC D-7  
powering off  
plex, PostScript simulated mixed PD 1-21  
PlexChangesDynamic PJ 7-2  
PlexChangesDynamic attribute PJ 1-19  
ports PD 1-18  
post-enhancement PD 1-14  
PostScript IS 6-2  
system CM 3-3  
code examples PJ 6-4  
powering off after power failure CM 3-5  
powering on IS 6-1  
comment format PD 1-27  
Document Structuring Convention (DSC)  
PJ 4-2  
controller CM 3-2  
system CM 3-1  
EOF delimiters PD 1-18PD 1-20  
extensions, proprietary PD 1-16  
fonts  
PPD  
files PD 1-28PD 1-29  
specifications PD 1-28  
listing PD 1-2  
PPD file, installing SJ 2-5, SJ 2-15  
CM = Guide to Configuring and Managing the System  
DC = Decomposition Service and Tools Guide  
PJ = Guide to Managing Print Jobs RM -Guide to Performing Routine  
SO = System Overview Guide TG = Troubleshooting Guide  
IP = Installation Planning Guide  
IS = IPDS Solutions Guide  
PD = Guide to Using PDL  
Maintenance SJ = Guide to Submitting Jobs from the Client  
INDEX-23  
Master Index  
 
INDEX  
PPFA (Page Printer Formatting Aid) IS 4-3  
PPM (pages per minute) DC D-1  
precedence, dynamic media PJ 4-5  
precedence, plex changes PJ 7-4  
predrilled paper IP A-4, SO A-4  
pre-enhancement PD 1-14  
preferences  
arrival PJ 3-2  
canceling PJ 3-3  
cancelling PJ 3-4  
changing job name  
Windows NT 4.0 (transparent) SJ  
5-59  
concatenating chapters DC 6-11  
constructing PJ 5-1  
Quick Print for Windows NT 4.0  
print SJ 6-23SJ 6-25  
copying PJ 5-11  
Windows NT 4.0 (transparent) SJ 5-76  
Pre-installation checklist IP 6-19  
preinstallation checklist IP 4-8  
preprinted paper IP A-3, SO A-3  
presentation highlight color rendering PJ  
1-14  
delivery instructions SJ 6-14  
delivery order PJ 5-8  
dividing PJ 5-1  
enabling ineligible DC 7-6  
failures  
DOS formmrg DC 6-13  
DOS reprint DC 6-13  
DOS xcat DC 6-15  
preset colors PJ 1-14  
print  
engine  
DOS xmerge DC 6-14  
SunOS/Solaris formmerge DC 6-17  
Windows FormMerge DC 6-5  
Windows XCat DC 6-12  
holding PJ 3-3, PJ 3-6  
insertion order PJ 3-1  
interrupting PJ 3-14  
write-black PD 1-15PD 1-16, PD  
1-26  
write-white PD 1-15PD 1-16  
resolution, recommended PD 2-2PD 2-3  
server PJ 3-17  
speed PD 1-34PD 1-35  
Print Billing Report command CM 8-11  
Print Color Calibration Target command CM  
15-6  
listing PJ 3-7PJ 3-10  
Novell PJ 3-16  
prioritizing PJ 3-1  
print command SJ 3-1, SJ 3-2  
color mismatch results SJ 3-37  
Print Documents from CDROM command  
CM 2-8  
Print Documents from Floppy command CM  
2-9  
promoting PJ 3-3, PJ 3-11  
queue PJ 3-3  
referenced content PJ 6-1  
releasing PJ 3-3, PJ 3-11  
reordering PJ 3-2  
scheduling PJ 3-12  
print flows, AFP IS D-1IS D-7  
Print Font List command CM 10-8  
Print Font Sample command CM 10-8  
Print Form List command CM 11-1  
Print Form Sample command CM 11-3, DC  
D-3  
DOS reprint alternative DC 6-13  
syntax, example DC 7-6  
Windows Reprint alternative DC 6-3  
print job data, copying CM 9-8  
print job submission programs SJ 1-4  
print jobs  
starting PJ 3-13  
stopping PJ 3-14  
submitting PJ 4-2, SO 4-2SO 4-5  
transferring PJ 3-5  
Print Log command CM 9-13  
Print Monitor Application, LaserWriter  
version 8.x SJ 4-39  
Print on demand DC 1-2  
print options  
"Save as File" SJ 4-19, SJ 4-31  
application specific SJ 4-13, SJ 4-25  
background printing SJ 4-14, SJ 4-26  
color matching SJ 4-16, SJ 4-28  
advancing PJ 3-11  
CM = Guide to Configuring and Managing the System  
IS = IPDS Solutions Guide PD = Guide to Using PDL  
Maintenance SJ = Guide to Submitting Jobs from the Client  
DC = Decomposition Service and Tools Guide  
IP = Installation Planning Guide  
PJ = Guide to Managing Print Jobs  
SO = System Overview Guide  
RM -Guide to Performing Routine  
TG = Troubleshooting Guide  
INDEX-24  
Master Index  
 
INDEX  
cover page SJ 4-15, SJ 4-27  
IP F-20  
error handling SJ 4-18, SJ 4-30  
general SJ 4-12, SJ 4-24  
layout SJ 4-17, SJ 4-29  
printer specific SJ 4-20, SJ 4-32  
Xerox Job Ticket (Macintosh AdobePS  
driver) SJ 4-34  
VM with channel attachment IP E-6  
VSE with channel attachment IP E-7  
sample tray IP 3-1, SO 3-1  
printer controller  
components IP 2-1, SO 2-2  
placement IP 5-3IP 5-5  
results of print command color mismatch  
SJ 3-37  
Print Options command CM 5-29  
Print PCLFont Sample command CM 10-9  
print quality TG 5-1  
Printer Controller operations PD 1-22  
printer diagnostics CM 2-18  
Printer Dictionary operators PD 1-10PD  
1-11  
print queue  
Quick Print for Windows NT 4.0 SJ 6-25–  
SJ 6-36  
Windows NT 4.0 SJ 5-78  
print queues  
printer drivers  
installing and configuring  
Windows NT 4.0 (transparent) SJ  
5-41SJ 5-47  
conditions PJ 3-1  
managing PJ 3-16  
Novell Netware, managing PJ 3-16  
print queues, Novell IP D-2, IP D-11, IP  
D-13  
Print Sample Document command CM 8-7  
print server (PSERVER), Novell IP 4-11, IP  
D-3IP D-5, IP D-7IP D-11, IP D-13  
Print Service Facility, see PSF  
PRINTDEF command CM 4-6  
PRINTDEF program CM 4-2  
printer  
printer engine  
problems TG 6-1  
Printer Job Language, see PJL  
PrinterName attribute PJ 1-19  
printers  
adding Novell NetWare-attached printer  
to print queue list  
Quick Print for Windows NT 4.0 SJ  
6-29SJ 6-35  
adding TCP/IP-attached printer to print  
queue list  
Quick Print for Windows NT 4.0 SJ  
6-27SJ 6-28  
ByteCode compression DC 3-3  
capabilities IP 1-1, SO 1-1  
emulation IS 3-9  
attention alarm IP 3-1, SO 3-1  
components IP 1-9, IP 3-1, SO 3-1  
configurations IP 3-14, SO 3-15  
defining IP 8-4  
installation IP 8-1IP 8-2  
maintenance IP 8-5  
performance  
IBM Group 3 compatible IS 1-1  
models IS 3-3  
AS/400 IP F-28  
MVS IP F-19  
remote PJ 3-17  
pinging  
removing from setup, Quick Print for  
Windows NT 4.0 SJ 6-37  
restarting TG 7-4  
AS/400 IP F-25IP F-27  
MVS IP F-17IP F-19  
power requirements IP 5-6, IP 6-18  
printer control console IP 3-1, SO 3-1  
purge tray IP 3-1, SO 3-1  
sample definitions  
selecting  
Macintosh transparent printing SJ 4-2  
Quick Print for Windows NT 4.0 SJ  
6-2SJ 6-3  
MVS with channel attachment IP  
E-1IP E-3  
setting defaults, Quick Print for Windows  
NT 4.0 SJ 6-36  
MVS with TCP/IP connection IP F-1–  
specifications IS A-5  
CM = Guide to Configuring and Managing the System  
DC = Decomposition Service and Tools Guide  
PJ = Guide to Managing Print Jobs RM -Guide to Performing Routine  
SO = System Overview Guide TG = Troubleshooting Guide  
IP = Installation Planning Guide  
IS = IPDS Solutions Guide  
PD = Guide to Using PDL  
Maintenance SJ = Guide to Submitting Jobs from the Client  
INDEX-25  
Master Index  
 
INDEX  
virtual PJ 1-6  
printing  
billing meter data CM 8-11  
tray 4 TG 6-5  
procedures  
Background Forms, creating DC 5-2DC  
5-4  
cancelling PJ 3-4  
controller-resident forms  
Windows FormMerge DC 6-3DC 6-5  
Windows Reprint DC 6-2DC 6-3  
Decomp Service benefits DC 1-1  
duplex PD 2-8  
book building DC 6-10, DC 6-12  
File of Files, creating  
XCat DC 4-9DC 4-11  
XMerge DC 4-11DC 4-13  
forms  
environment IS 3-2  
creating DC 4-2  
font list CM 10-8  
font sample CM 10-8  
printing (Windows Reprint) DC 6-2–  
DC 6-3  
form samples CM 11-3  
IPDS PJ 3-15  
merge documents DC G-8  
options CM 5-11  
PCL font sample CM 10-9  
quality, features affecting TG 5-2  
remote solutions IS 3-10  
sample documents CM 8-5CM 8-7  
showing status CM 8-2  
single forms DC 7-6  
gfi directories, removing CM 13-3  
paper tray 4, loading RM 1-5  
paper trays 1, 2, 3, loading RM 1-2  
PostScript files, generating  
FormMerge (Windows) DC 6-3DC  
6-5  
XMerge (Windows) DC 6-5DC 6-7  
printers, restarting TG 7-4  
variable data files, creating DC 4-3DC  
4-9  
starting IPDS PJ 3-15  
Xerox Client Software, installing  
PC-DOS SJ 2-3SJ 2-4  
UNIX workstations SJ 2-10SJ 2-12  
processor IP 2-3, IP 5-6, SO 2-3  
product operator TG 5-2  
Profile parameters CM 6-3CM 6-6  
profiles CM 6-1CM 6-6  
creating CM 6-2  
setting CM 6-2  
showing CM 6-2  
programming, Main Stock  
Windows NT 4.0 (transparent) SJ 5-58  
Promote Document command PJ 3-11  
protocol  
data transfer PJ 3-5  
submission tools PJ 4-3PJ 4-7  
protocols  
network communication requirements  
SO 4-3SO 4-5  
translation requirements SO 4-4SO 4-5  
PS/2  
stopping CM 3-3, PJ 3-14  
stopping IPDS PJ 3-15  
TIFF tags DC 9-1DC 9-2  
using  
Macintosh (transparent) SJ 4-1SJ  
4-40  
Windows NT 4.0 (transparent) SJ  
5-47, SJ 5-49SJ 5-50  
using lpr utilities SJ 3-18  
using Xerox utilities software SJ 3-1  
printing configuration reports CM 2-23  
printing considerations SO 1-6  
printing documents from diskette CM 2-9  
printing files from CD ROM CM 2-8  
printing IPDS jobs PJ 8-3  
priority in setting attributes PJ 1-6  
problems  
high-capacity stacker (HCS) TG 6-4  
high-capacity stacker stapler (HCSS) TG  
6-4  
printer TG 6-1  
AFP data flow IS D-5  
printer engine TG 6-1  
PS2 setting PJ 1-11  
system TG 7-1  
PSERVER PJ 3-17, IP D-3  
CM = Guide to Configuring and Managing the System  
DC = Decomposition Service and Tools Guide  
PJ = Guide to Managing Print Jobs RM -Guide to Performing Routine  
SO = System Overview Guide TG = Troubleshooting Guide  
IP = Installation Planning Guide  
IS = IPDS Solutions Guide  
PD = Guide to Using PDL  
Maintenance SJ = Guide to Submitting Jobs from the Client  
INDEX-26  
Master Index  
 
INDEX  
choosing CM 4-1CM 4-3  
R
configuring system as CM 4-4  
PSERVER configuration PJ 2-9  
PSF  
ranges, printing PJ 1-1  
raster graphics PD 2-3  
read access PJ 6-3  
data towers IS 2-6  
platforms IS 2-6  
ReadyToPrint attribute PJ 1-20  
rebooting  
printer definitions IP E-2  
supported levels, minimum IS 2-7  
PSF compatibility SO 5-1  
PSF for AIX IS 2-14IS 2-15  
PSF/6000 IP E-5, IP F-30  
PSF/MVS  
controller CM 3-6  
RecipientName attribute PJ 1-20  
reference mode DC 6-5  
referenced content files  
associating PJ 6-7  
naming PJ 6-1  
configuring IP F-9  
placement PJ 6-2  
PRINTDEV statement example IP F-13  
PRINTDEV statement parameters IP  
F-9IP F-12  
removing PJ 6-7PJ 6-8  
sharing PJ 6-2  
single-use PJ 6-2  
PSF/VSE IP 1-5, SO 5-1  
PT2 Subset SO 5-6  
transferring PJ 6-3  
referencing files  
PTOCA IS 2-5  
using GetTiff macro PJ 6-4PJ 6-5  
within PostScript masters PJ 6-3  
referencing forms DC G-6  
reinitializing software CM 2-26  
relative addressing PJ 6-1  
Release Document command PJ 3-11  
remote access CM 1-4  
broadcast message CM 2-1  
telnet SJ 8-1  
PTOCA (Presentation Text Object Content  
Architecture) IP 1-8, SO 5-5, SO 5-6  
publications IP C-1  
purging accounting information IP 4-10  
Q
QuarkXPress software, image quality SJ  
4-40  
queues  
web based CM 1-5  
directory, Novell PJ 3-16  
job priority PJ 3-2  
remote printer PJ 3-18  
starting PJ 3-13  
Web-based SJ 8-1  
remote access, using CM 1-4  
remote connections IS 3-10  
remote device  
stopping PJ 3-14  
enabling CM 2-29  
Quick Print for Windows NT 4.0  
accessing Quick Print SJ 6-2SJ 6-3  
customizing print queue list SJ 6-25SJ  
6-37  
remote disabling Unix shell CM 2-32  
remote enabling Unix shell CM 2-31  
remote printer (RPRINTER), Novell IP 4-12,  
IP D-5IP D-9, IP D-11IP D-14  
remote printer workstation, Novell PJ 3-18  
remote service TG 1-2  
removing  
gfi directories CM 13-3  
orphan data files CM 12-6  
rendering  
job tickets  
loading SJ 6-4SJ 6-5  
resetting to defaults SJ 6-8  
saving SJ 6-6  
setting up SJ 6-9SJ 6-25  
overview SJ 6-1  
selecting printer SJ 6-2SJ 6-3  
QuotaPages attribute PJ 1-20  
QuotaSeconds attribute PJ 1-20  
gray PD 1-27  
image PD 1-37  
reordering print jobs PJ 3-2  
CM = Guide to Configuring and Managing the System  
DC = Decomposition Service and Tools Guide  
PJ = Guide to Managing Print Jobs RM -Guide to Performing Routine  
SO = System Overview Guide TG = Troubleshooting Guide  
IP = Installation Planning Guide  
IS = IPDS Solutions Guide  
PD = Guide to Using PDL  
Maintenance SJ = Guide to Submitting Jobs from the Client  
INDEX-27  
Master Index  
 
INDEX  
reprint tool  
Restart IPDS Parser command CM 3-6  
Restart Sequencer DC B-1  
Restart Sequencer command CM 3-6  
Restart System command CM 3-6  
restarting  
DOS DC 6-13  
overview DC 1-4  
Windows DC 6-2DC 6-3  
ReprocessForCopies attribute PJ 1-21  
required directory, referenced files PJ 6-2  
requirements  
controller CM 3-6  
IPDS parser CM 3-6  
see also specifications  
restore context, bypassing PD 1-9  
Restore Default Imager Parameters  
command CM 5-32  
Restore Default PCL Imager Parameters  
command CM 5-35  
clearance space IP 6-10IP 6-14  
delivery access IP 6-15  
environmental IP 6-5  
Ethernet IP 4-15  
network information IP 4-11  
network interface IP 4-14  
Novell Netware information IP 4-11  
operating systems SO 4-4SO 4-5  
power IP 5-1IP 5-3, IP 5-6, IP 6-1, IP  
6-18  
Restore IPDS Input Groups PJ 2-1  
Restore IPDS Input Groups command PJ  
2-11  
Restore Site Files command CM 2-10  
Restore Virtual Printers List command CM  
2-11  
site IP 4-6  
space IP 5-3, IP 6-10IP 6-14  
Token Ring IP 4-15  
Restore Xerox Files command CM 2-11  
restoring  
virtual printers list CM 2-11  
restoring backed-up site files CM 2-10  
restoring forms DC F-2  
restoring key-value pairs PJ 5-2  
restoring Xerox files CM 2-11  
retry count IP 4-10  
RGB color space PJ 1-23  
RGB color, converting PJ 1-14  
root password IP 4-9  
translation protocol SO 4-4SO 4-5  
requirements, hard disk TG 2-2  
requirements, installation DC 2-1  
Reset Job IDs CM 2-12  
Reset Job IDs command CM 2-12  
resetting job tickets  
Windows NT 4.0 (transparent) SJ 5-55–  
SJ 5-56  
resolution PD 1-26, IS 4-13  
enhancement PD 1-12PD 1-16  
fax PD 1-34  
rotate operator PD 1-37, PD 1-41  
rotation, image PD 1-36PD 1-37  
rough performance estimates DC D-2  
router, default IP 4-9  
PCL 5 PD 2-2PD 2-3  
Resolution attribute PJ 1-21, PJ 3-10  
resolution, IPS 7.2 and NPS/IPS IS 4-14  
ResolutionUnit TIFF tag DC E-1  
resource towers IS 3-7  
resourceMatch attribute PJ 3-12  
resources  
RPRINTER PJ 3-18, IP D-7  
choosing CM 4-1CM 4-3  
configuring system as CM 4-5  
RPrinter problems TG 3-3  
RS/6000  
AFP data flow IS D-6  
creating IS B-1IS B-4  
MICR IS 5-13  
connections IS 2-13IS 2-15  
RS232 port PD 1-18  
storing IS 4-1  
responsibilities  
run exec macro DC 1-5, DC 8-1DC 8-3, DC  
8-6  
customer IP 1-12, IP 4-3IP 4-5, IP 8-2–  
IP 8-3  
S
Xerox IP 1-12, IP 4-2, IP 8-2IP 8-3  
sample documents, printing CM 8-5CM 8-7  
CM = Guide to Configuring and Managing the System  
DC = Decomposition Service and Tools Guide  
PJ = Guide to Managing Print Jobs RM -Guide to Performing Routine  
SO = System Overview Guide TG = Troubleshooting Guide  
IP = Installation Planning Guide  
IS = IPDS Solutions Guide  
PD = Guide to Using PDL  
Maintenance SJ = Guide to Submitting Jobs from the Client  
INDEX-28  
Master Index  
 
INDEX  
sample printer definitions  
MVS with channel attachment IP E-1IP  
E-3  
transparencies IP A-3, SO A-3  
Selecting Media for Feeder Trays PJ 8-2  
sender name  
MVS with TCP/IP connection IP F-1IP  
F-20  
VM with channel attachment IP E-6  
VSE with channel attachment IP E-7  
SamplesPerPixel TIFF tag DC E-1  
SAP packets TG 3-1  
unknown  
Macintosh AdobePS driver SJ 4-22  
Macintosh LaserWriter 8.x driver SJ  
4-10  
Macintosh LaserWriter driver 7.x SJ  
4-9  
saturation, color PJ 1-14  
save context, bypassing PD 1-9  
SaveFormBC attribute DC 3-1, DC A-2  
SaveFormG4 attribute DC 3-1, DC A-2  
SaveFormG4 format DC D-7  
SaveMaskBC attribute DC 3-1, DC 7-3  
SaveMaskBC format DC 5-1, PJ 1-10  
SaveMaskG4 format PJ 1-10  
saving job tickets  
SenderName attribute PJ 1-11, PJ 1-21  
sending print data PJ 3-16  
sequencer  
restarting CM 3-5  
serial port, asynchronous PD 1-18  
Server Dictionary operators PD 1-9  
server override switch, Xerox Client print  
command TG 2-2  
service  
Quick Print for Windows NT 4.0 SJ 6-6  
Windows NT 4.0 (transparent) SJ 5-53–  
SJ 5-54  
Xerox responsibilities IP 4-2  
service call, required information TG 1-1  
service telephone number IP B-1, RM 8-1  
Set Channel Offline command PJ 3-15  
Set Channel Online command PJ 3-15  
Set color calibrations CM 15-1, CM 15-6, CM  
15-10, CM 15-11, CM 15-12  
saving print jobs DC 3-1DC 3-6  
scale operator PD 1-40  
scaling PD 1-26, PD 1-34, PD 1-40PD 1-43  
scaling images  
run exec macro DC 8-2  
TIFF images DC 8-4  
Set Default Color Calibration command CM  
15-11  
scanconversion TG 5-4  
scanning  
conversion PD 1-23, PD 1-25  
order PD 1-35PD 1-40  
rotation PD 1-35PD 1-40  
scheduling  
Set Default Media command CM 5-2  
set input profile command CM 6-2, CM 6-3  
Set IPDS Virtual Printer command PJ 2-10  
Set Option command CM 5-11  
set output profile command CM 6-2  
Set Profiles command CM 6-2, CM 6-3  
Set Scheduling Policy command PJ 3-12  
Set Status Message command CM 2-12  
Set Time command CM 7-1  
policy  
setting PJ 3-2, PJ 3-13  
showing PJ 3-2  
print jobs PJ 3-12  
Security IS 5-14  
security option, lpr CM 12-5  
Security, MICR CM 14-6  
security, MICR IS 5-14  
Set Tray Purge|No Purge CM 5-8  
Set Tray <n> Tray <m> command CM 5-7  
Set Tray Command RM 1-1  
Set Tray command CM 5-4, CM 5-5, DC 7-6,  
PJ 4-1, PJ 4-4  
Select Jobs dialog DC 6-10DC 6-11  
Select Paper dialog DC 6-8  
selecting  
Set Tray Default command CM 5-5  
Set tray from virtual printer media CM 5-8  
Set Virtual Printer Flags command PJ 2-8  
setbscolor TG 5-3  
labels IP A-3, SO A-3  
paper, characteristics IP A-3, SO A-3  
SetCacheDevice operator PD 1-32  
CM = Guide to Configuring and Managing the System  
IS = IPDS Solutions Guide PD = Guide to Using PDL  
Maintenance SJ = Guide to Submitting Jobs from the Client  
DC = Decomposition Service and Tools Guide  
IP = Installation Planning Guide  
PJ = Guide to Managing Print Jobs  
SO = System Overview Guide  
RM -Guide to Performing Routine  
TG = Troubleshooting Guide  
INDEX-29  
Master Index  
 
INDEX  
setcmykcolor TG 5-3  
CM 15-12  
setcolorscreen TG 5-2TG 5-3  
setfileposition operator PD 1-21  
setflat TG 5-4  
Show Default Media command CM 5-4  
Show Document Attributes command PJ  
1-30  
setflat operator PD 1-25  
setgray TG 5-3  
setgray operator PD 1-28  
setlinewidth TG 5-4  
Show Host ID CM 2-13  
Show Host ID command CM 2-13  
Show Imager Parameters command CM  
5-30  
setlinewidth operator PD 1-23, PD 1-24  
setpagedevice error  
Show IPDS Tracing command CM 2-13  
Show IPDS Virtual Printer command PJ 2-10  
Show License Status command CM 2-15,  
CM 2-17  
Show Log command CM 9-10, DC 7-7, DC  
D-1  
DOS xcat DC 6-15  
SunOS/Solaris formmerge DC 6-19  
setpagedevice operator  
calls, multiple PJ 5-2  
caution PJ 5-2  
command PJ 5-12  
Show PCL Imager Parameters command  
CM 5-33  
example PJ 5-4  
media  
Show Profiles command CM 6-1  
Show Scheduling Policy command PJ 3-13  
Show Status command CM 8-2, DC 7-8, DC  
D-7  
requests PJ 4-2  
selection PJ 4-6  
MultiSet feature PJ 5-2  
setrgbcolor TG 5-3  
setrgbcolor call DC 8-6  
setscreen TG 5-2TG 5-3  
setscreen operator PD 1-32  
setting  
Show Time command CM 7-1  
showpage operator DC 8-2  
shutting down the system CM 3-3  
simplex output PD 2-6  
simplex printing  
specifying  
default media CM 5-7  
dynamic media PJ 4-5PJ 4-6  
feeder tray attributes CM 5-4  
imager parameters CM 5-29  
imager parameters, PCL CM 5-33  
multiple copies PJ 5-11  
printer options CM 5-29  
profiles CM 6-2  
Windows NT 4.0 (transparent) SJ  
5-57  
single job, removing referenced files PJ 6-7  
single-use referenced content files PJ 6-2  
site  
selection, Xerox responsibilities IP 4-2  
Sixth Sense IP 1-13, IP B-2, SO 1-4  
size of job PJ 3-1  
static media PJ 4-1  
SkipJTPrescan attribute PJ 1-22  
slow scan direction PD 1-35, PD 1-38  
smooth curves TG 5-4  
Setting IPDS Options PJ 8-1  
setting stacker groups CM 5-10  
settransfer TG 5-3  
SNMP IP 1-3, SO 1-3  
shading  
socket printing SJ 2-19  
adding color IS 5-9  
limitations IS C-1  
Socket Printing, TCP/IP CM 2-28  
software IS 3-2  
Macintosh LaserWriter driver 7.x SJ 4-10  
shared resource content files, naming PJ 6-2  
shared space IP 6-11IP 6-14  
shortcuts, command CM 1-1  
Show Default Color Calibration command  
corruption problems CM 2-26  
features, IPS SO 5-5  
licensis CM 2-15  
network IP 1-11IP 1-12  
operating system IP 1-11IP 1-12  
CM = Guide to Configuring and Managing the System  
IS = IPDS Solutions Guide PD = Guide to Using PDL  
Maintenance SJ = Guide to Submitting Jobs from the Client  
DC = Decomposition Service and Tools Guide  
IP = Installation Planning Guide  
PJ = Guide to Managing Print Jobs  
SO = System Overview Guide  
RM -Guide to Performing Routine  
TG = Troubleshooting Guide  
INDEX-30  
Master Index  
 
INDEX  
printer controller  
using PJ 5-7PJ 5-10  
stapling PD 2-7, PD 2-9  
Start command CM 3-5, PJ 3-13  
Start IPDS Printing command PJ 3-15  
Start IPDS Tracing command CM 2-13  
Start Virtual Printer command DC 7-9, PJ 2-7  
starting  
installing IP 8-1  
reinitializing CM 2-26  
supported products IP 1-8, SO 5-5  
system SO 4-1  
software license SO 1-5  
software prerequisites  
AS/400 IP F-21  
IPDS printing PJ 3-15  
system CM 3-1  
MVS IP F-1  
software updates CM 2-7  
installing from CD-ROM CM 2-7  
installing from diskette CM 2-7  
Solaris 2.3  
tools supported DC 1-5  
Solaris clients, lpr SJ 2-18  
Sonoran fonts IS 4-11  
space  
starting job processing PJ 3-13  
static data  
frames DC 4-7  
variable data compared DC 4-1  
static forms  
creating DC G-6  
filename DC G-7  
referencing DC G-6  
planning guidelines IP 6-10  
requirements IP 5-3, IP 6-10IP 6-14  
space character DC 4-11, DC 4-13  
special  
processing PJ 1-10  
special pages  
submitting DC G-6  
static media specification PJ 4-1  
static plex changes PJ 7-3  
Status attribute PJ 1-22  
Status Dictionary operators PD 1-10  
status message  
Windows NT 4.0 (transparent)  
adding SJ 5-65  
setting telnet CM 1-4  
status messages  
changing SJ 5-67  
setting CM 2-12  
deleting SJ 5-67  
overview SJ 5-65SJ 5-67  
specifications  
status, determining PJ 3-7PJ 3-10  
status, job command SO 4-6  
stdout message PD 1-22  
Stitcher/Stacker PJ 5-8  
stitcher/stacker IP 6-18  
stitching IS 5-10  
see also requirements  
CCITT PD 1-34  
electrical IP 5-1IP 5-3, IP 5-6, IP 6-18  
environmental IP 5-3  
PPD PD 1-28  
specifying  
Quick Print for Windows NT 4.0 SJ  
6-13  
printer IP 6-18  
printer controller IP 5-6  
specifications, printers IS A-5  
speed, printing PD 1-34PD 1-35  
spooling, checking available space CM 8-2  
stacker tray  
Windows NT 4.0 (transparent) SJ  
5-59  
specifying none  
Windows NT 4.0 (transparent) SJ  
5-59  
specifying PJ 1-18  
stackers RM 2-1  
STM (Sense Type and Model) command IS  
3-9  
stacking, offset facility IS 5-10  
Staple attribute PJ 1-22  
Staple command  
stock limitations SO 1-7  
Stop command CM 3-5, PJ 3-14  
Stop IPDS Printing command PJ 3-15  
Stop IPDS Tracing command CM 2-14  
syntax PJ 1-18  
CM = Guide to Configuring and Managing the System  
DC = Decomposition Service and Tools Guide  
PJ = Guide to Managing Print Jobs RM -Guide to Performing Routine  
SO = System Overview Guide TG = Troubleshooting Guide  
IP = Installation Planning Guide  
IS = IPDS Solutions Guide  
PD = Guide to Using PDL  
Maintenance SJ = Guide to Submitting Jobs from the Client  
INDEX-31  
Master Index  
 
INDEX  
Stop Queuing command CM 4-4  
Stop Virtual Printer command DC 7-9, PJ 2-7  
stopping  
supplies table IP A-9, SO A-9  
support services IP A-14IP A-15, IP B-1,  
RM 8-1RM 8-6, SO A-14SO A-15  
suppressing header pages PJ 1-11  
symbol sets, PCL CM 5-38  
system CM 3-1  
Stopping and starting IPDS printing PJ 3-15  
stopping and starting job processing CM 3-5  
stopping the system  
using background menu CM 3-3  
using Halt System command CM 3-3  
stopping virtual printers DC 7-9  
storage object size limits PD 1-33  
StripOffsets TIFF tag DC E-1  
stroke TG 5-4  
system components IP 1-9  
System Dictionary operators PD 1-8  
System overview IP 1-1, SO 1-1  
system problems TG 7-1  
system status, checking CM 8-1CM 8-8  
System V UNIX clients, lpr SJ 2-17  
Systems Application Architecture (SAA) IS  
2-4  
stroke operator PD 1-23PD 1-24  
subdirectory, appName PJ 6-2  
SubmissionDate attribute PJ 1-22  
SubmissionProtocol attribute PJ 1-22  
Submitter media specification PJ 4-2  
submitting print jobs SO 4-2SO 4-5  
Macintosh drivers (transparent) SJ 4-1–  
SJ 4-40  
T
tab stock, Quick Print for Windows NT 4.0SJ  
6-16  
tables, color  
ColorTables PJ 1-14  
tape  
copying documents to CM 2-4, CM 2-5  
listing files on CM 2-5  
methods SJ 1-4  
workstation reference SJ 1-5SJ 1-6  
subscript support SO 5-6  
Sun PC-NFS V5.1 SJ 2-2  
Sun SPARCstation, requirements IS 3-1  
Sun workstations IP 5-4  
SunOS clients, lpr SJ 2-17  
SunOS/Solaris  
ordering IP A-8, SO A-8  
tape drive IP 5-6  
TCP/IP PJ 3-5, IP 8-2  
defining IP F-1  
Ethernet interface IP 1-5, SO 5-2  
MVS  
configuring IP F-13  
formmerge tool DC 6-17  
getg4 tool DC 9-3  
tools supported DC 1-5  
Profile dataset IP F-14IP F-16  
Socket Printing CM 2-28  
TCP/IP servers  
xcat tool DC 6-19  
Quick Print for Windows NT 4.0 SJ 6-27  
TCP/IP socket printing SJ 2-19  
TCP/IP, see Ethernet; Token Ring  
technical manual example DC 1-2  
telephone line, modem CM 2-30  
telephone numbers  
Xerox Parts and Product Support Center  
IP A-14, SO A-14  
Xerox Supply Center IP A-14, SO A-14  
telnet SJ 8-1  
superscript support SO 5-6  
Superuser password IP 4-9  
supplies  
checklist IP A-16, SO A-16  
consumable supplies tables IP A-9, SO  
A-9  
developer IP A-8, SO A-8  
diskettes IP A-8, SO A-8  
fuser  
agent IP A-7, SO A-7  
shield IP A-7, SO A-7  
paper IP A-1IP A-5, SO A-1SO A-5  
tapes IP A-8, SO A-8  
broadcast message, sending CM 1-4  
greeting message CM 1-4  
listing clients CM 1-4  
logging on and off CM 1-4  
CM = Guide to Configuring and Managing the System  
IS = IPDS Solutions Guide PD = Guide to Using PDL  
Maintenance SJ = Guide to Submitting Jobs from the Client  
DC = Decomposition Service and Tools Guide  
IP = Installation Planning Guide  
PJ = Guide to Managing Print Jobs  
SO = System Overview Guide  
RM -Guide to Performing Routine  
TG = Troubleshooting Guide  
INDEX-32  
Master Index  
 
INDEX  
messages CM 1-4  
showing CM 2-13  
starting CM 2-13  
using CM 1-4  
telnet connections, determining job statusSJ  
1-6  
tracing, IPDSstopping CM 2-14  
training IP B-3  
Telnet greeting message CM 12-4  
terminating commands CM 1-2  
test masters, handwritten PD 1-1PD 1-2  
The DC 6-8  
Thicken attribute PJ 1-22  
TIFF file format DC E-1  
TIFF files, reading PJ 6-4  
TIFF tags  
customer responsibility IP 4-4  
operators IP 4-3, IP 8-2  
Xerox responsibilities IP 4-2  
training, operators RM 8-2  
transfer TG 5-3  
transfer functions TG 5-3  
transferring software updates CM 2-7  
transforming user coordinates PD 1-40  
translation requirements, protocol SO 4-4–  
SO 4-5  
mandatory DC E-1  
printing  
getg4 tool (DOS) DC 9-1DC 9-2  
getg4 tool (SunOS/Solaris) DC 9-3  
TIFF utilities  
transmission rate IP 1-5, SO 5-2  
transparencies, selecting IP A-3, SO A-3  
transport, bypass PJ 1-18  
tray 4  
getg4 (DOS) DC 9-1DC 9-2  
overview DC 9-1  
problems TG 6-5  
Tiff/G4 files  
tray assignment, PCL PD 2-12  
tray assignments PD 2-13  
Tray definition, PCL PD 2-12  
tray switching, automatic SO 1-7  
trays  
ByteCode files compared DC 3-2  
processing, GetTiff macro DC 8-4DC  
8-7  
TIFF/G4 format DC 8-6  
TiffEdit tool  
capacities  
Macintosh platform DC 1-5  
Tiff/G4 files DC 3-2  
time requirements, planning installation IP  
4-5  
HCF IP 3-15, SO 3-16  
determinig loaded media DC 6-8  
selecting PJ 4-1  
Set Tray command DC 7-6  
specifying PJ 1-18  
time, setting CM 7-1  
tinted paper IP A-3, SO A-3  
Token Ring IP 1-5, IP 1-10, IP 4-15, SO 5-2  
AS/400 IS 2-13  
number DC 6-10  
trays, see input trays; output trays  
troubleshooting  
mainframes IS 2-11  
Novell implementation TG 3-3  
Xerox Client Software installation TG  
2-1TG 2-2  
Token Ring LAN SO 4-6  
tokens, defining PD 1-19PD 1-20  
tolerance, media matching PJ 4-6  
toner cartridge, replacing RM 4-2  
tools  
tumble duplex printing PJ 5-11  
specifying  
Windows NT 4.0 (transparent) SJ  
5-57  
listed DC 1-4  
touch screen, cleaning RM 6-2  
Trace command CM 2-13  
trace facility SO 5-6  
Type 0 fonts PD 1-3  
installing PD 1-3  
Type 1 fonts  
trace file  
creating PD 1-6  
viewing CM 2-13  
installing PD 1-2  
tracing, IPDS CM 2-13  
loading PD 1-4, PD 1-6  
CM = Guide to Configuring and Managing the System  
DC = Decomposition Service and Tools Guide  
PJ = Guide to Managing Print Jobs RM -Guide to Performing Routine  
SO = System Overview Guide TG = Troubleshooting Guide  
IP = Installation Planning Guide  
IS = IPDS Solutions Guide  
PD = Guide to Using PDL  
Maintenance SJ = Guide to Submitting Jobs from the Client  
INDEX-33  
Master Index  
 
INDEX  
using PD 1-5PD 1-8  
Type 3 fonts PD 1-3  
installing PD 1-3  
Unset Tray CM 5-9, CM 5-10  
updates  
software CM 2-7  
typefaces, see fonts  
updates, software  
installing from CD-ROM CM 2-7  
installing from diskette CM 2-7  
user coordinate system  
default PD 1-39PD 1-41  
mapping PD 1-1PD 1-2  
User Dictionary operators PD 1-8PD 1-9  
user interface IS 3-8  
user interface, web-based SJ 8-1  
user-customized TRC PJ 1-23  
user-defined category PJ 1-9  
user-defined fonts PD 1-4  
utilities  
U
UI commands  
Change virtual printer  
Backgroundform attribute DC 7-2  
CycleForms attribute DC 5-5DC 5-8  
disposition attribute DC 7-3  
overview DC 7-2  
Create Virtual Printer DC 7-1  
Delete Form DC 7-4  
Delete Virtual Printer DC 7-4  
List Documents DC D-9  
List Forms DC 7-4, DC D-7  
List Virtual Printers DC 7-5  
listed DC 7-1  
PCONSOLE PJ 3-16  
PSERVER PJ 3-17  
RPRINTER PJ 3-18  
Print Form Sample DC 7-6, DC D-3  
Set Tray DC 7-6  
utility commands CM 2-1CM 2-13  
Show Log DC 7-7, DC D-1  
Show Status DC 7-8, DC D-7  
Start Virtual Printer DC 7-9  
Stop Virtual Printer DC 7-9  
Uncollated attribute PJ 1-22  
undefined command error PD 1-18  
underscore support SO 5-6  
United States/Canada IP 5-2  
UNIX  
V
/var/db/forms directory DC 4-3, DC 6-3  
/var/spool/data directory  
generating PostScript files DC 6-3  
File of Files default DC 6-5  
storing files DC C-1  
Xcat jobs default DC 6-12  
variable data  
forms overlaying DC 6-17  
Mask, Form formats DC 3-4DC 3-6  
overlaying images DC 5-1DC 5-4, DC  
7-2  
command tool IP 4-10  
compressed bar format CM 2-3  
root password, selecting IP 4-9  
shell, using CM 12-2  
specifying form pages DC 6-7  
static data compared DC 4-1  
variable data files  
Sun operating system IP 2-5, SO 2-6  
Superuser password IP 4-9  
UNIX client software  
blank page requirement DC 6-5, DC 6-7,  
DC 6-14, DC 6-18  
installing SJ 2-9  
removing SJ 2-14  
Unix compressed bar format CM 2-3, CM  
2-5, CM 2-6  
caveats DC 6-5, DC 6-14, DC 6-18  
creating, Word Mail Merge DC 4-3DC  
4-9  
Unix shell  
directory storage methods DC C-1  
locating local DC 6-5  
vector graphics PD 2-2  
VerticalImageShift attribute PJ 1-23  
VerticalImageShiftForBack attribute PJ 1-24  
disabling remote CM 2-32  
disabling remotely CM 2-32  
enabling remotely CM 2-31  
unresponsive printer CM 3-5  
CM = Guide to Configuring and Managing the System  
DC = Decomposition Service and Tools Guide  
PJ = Guide to Managing Print Jobs RM -Guide to Performing Routine  
SO = System Overview Guide TG = Troubleshooting Guide  
IP = Installation Planning Guide  
IS = IPDS Solutions Guide  
PD = Guide to Using PDL  
Maintenance SJ = Guide to Submitting Jobs from the Client  
INDEX-34  
Master Index  
 
INDEX  
View Field Codes button DC 8-8  
viewing print queue, Novell PJ 3-16  
VIPP  
W
waste dry ink/toner RM 5-1  
waste dry ink/toner, replacing RM 5-2  
web based access CM 1-5  
Web-based user interface SJ 8-1  
weight conversion RM 1-9  
Weight field, Select Paper dialog  
editing DC 6-15, DC 6-19  
"What is..." prompt  
benefits PD 3-1  
demo mode PD 3-3  
license PD 3-3  
modes PD 3-1, PD 3-2  
VIPP cache capability CM 5-28  
virtual memory PD 1-20, PD 1-31  
virtual printer attributes  
Background Form DC 5-1  
disposition DC 3-1DC 3-6, DC 5-3  
virtual printer, IPDS PJ 2-1  
virtual printers CM 4-2, CM 4-6, IP 4-12, IP  
D-5, IP D-11, IP D-13  
backing up list of CM 2-11  
changing PJ 2-3PJ 2-4  
Create Virtual Printer command DC 7-1  
creating Background Forms DC 5-1, DC  
7-2  
DOS xcat DC 6-15  
DOS xmerge DC 6-15  
SunOS/Solaris formmerge DC 6-19  
Windows  
changing form directory DC B-1DC B-4  
Decomp Service installation DC 2-1  
FormMerge tool DC 6-3DC 6-5  
Reprint tool DC 6-2DC 6-3  
XCat tool  
described DC 6-7DC 6-12  
XMerge tool DC 6-5DC 6-7  
Windows 2000, setting up a new printer SJ  
2-20  
defining, configuring  
commands DC 3-1  
example DC 3-7  
Windows NT 4.0 (transparent)  
installing and configuring system SJ  
5-41SJ 5-47  
mask/form formats DC 3-3DC 3-6  
TIFF/G4, ByteCode formats DC 3-2  
deleting DC 7-4, PJ 2-4  
description PJ 2-1  
listing PJ 2-5  
media attributes PJ 4-3  
media list PJ 4-3  
restarting DC 7-9  
restoring list of CM 2-11  
setting flags PJ 2-8  
specifying using Novell forms PJ 2-9  
starting PJ 2-7  
job tickets  
opening SJ 5-51SJ 5-52  
resetting SJ 5-55SJ 5-56  
saving SJ 5-53SJ 5-54  
setting up SJ 5-56SJ 5-77  
Windows platforms DC 1-5, DC 6-2  
wizard mode, using CM 12-1  
Wollongong Pathway Access release 3.1 SJ  
2-2  
Word 6.0, Microsoft  
stopping DC 7-9, PJ 2-7  
virtual printers, overview SJ 1-3  
VM IP E-6  
VM print flow IS D-3  
VMS systems SJ 1-1  
Vn DC 5-8  
voltages, requirements IP 5-2  
VSE IP E-7  
inserting form references DC 8-8  
Mail Merge  
producing PostScript file DC 5-2  
variable data files DC 4-3DC 4-9  
WordPerfect, converting IS C-2  
workstation, remote PJ 3-18  
workstations  
client SO 4-1  
VSE print flow IS D-4  
description SO 4-1SO 4-5  
disk space requirements SJ 2-1  
workstations see Sun workstations  
CM = Guide to Configuring and Managing the System  
IS = IPDS Solutions Guide PD = Guide to Using PDL  
Maintenance SJ = Guide to Submitting Jobs from the Client  
DC = Decomposition Service and Tools Guide  
IP = Installation Planning Guide  
PJ = Guide to Managing Print Jobs  
SO = System Overview Guide  
RM -Guide to Performing Routine  
TG = Troubleshooting Guide  
INDEX-35  
Master Index  
 
INDEX  
write-black engine PD 1-15PD 1-16, PD  
1-26  
write-white engine PD 1-15PD 1-16  
Windows NT 4.0, printing to SJ 5-78  
Xerox PPD files required with third-party  
drivers  
Windows NT 4.0 (transparent) SJ 5-47  
Xerox responsibilities IP 4-2, IP 8-2IP 8-3  
Xerox Supply Center IP A-14, SO A-14  
Xerox utilities software SJ 3-1  
Xerox value-added features IS 1-1, IS 5-1  
XGFNub. See line mode extension  
XIPP prescan DC C-1  
X
x axis PD 1-35  
XCat tool  
creating File of Files DC 4-9DC 4-11  
overview DC 1-4  
Windows  
described DC 6-7DC 6-12  
xcat tool  
XMerge tool  
creating File of Files DC 4-11DC 4-13  
overview DC 1-5  
DOS DC 6-15  
Sun OS/Solaris DC 6-19  
XDS for Macintosh  
Windows DC 6-5DC 6-7  
xmerge tool  
system requirements SJ 4-1  
Xerox Check Performance Guarantee IS  
5-11  
Xerox Client print command TG 2-1  
Xerox Client Software IP 2-6, IP 4-10, IP  
8-2, SO 2-7  
DOS DC 6-14  
SunOS/Solaris DC 6-18  
XPAF solution, comparing IS 6-1  
XPPS PJ 4-2  
XResolution TIFF tag DC E-1  
installing  
Y
man pages SJ 2-12SJ 2-13  
PC-DOS workstations SJ 2-2SJ 2-4  
UNIX workstations SJ 2-9SJ 2-12  
package, general requirements SJ 2-1  
removing  
y axis PD 1-35  
YResolution TIFF tag DC E-1  
Z
zero-width lines, imaging PD 1-24  
zone name, specifying IP 4-10  
DOS SJ 2-6  
UNIX SJ 2-14  
Xerox Client Software, troubleshooting  
installation TG 2-1TG 2-2  
Xerox CMC-7 IS 5-12  
Xerox Customer Education IP B-4, RM 8-3  
Xerox Customer Parts and Product Support  
Center IP A-14, SO A-14  
Xerox Customer Service Center RM 8-1  
Xerox Customer Service Support Center IP  
B-1  
Xerox Documentation and Software  
Services (XDSS) IP B-3, RM 8-1  
Xerox drivers SJ 1-1  
Xerox files  
restoring backed up CM 2-11  
Xerox files, backing up CM 2-10  
Xerox Font Center IP B-4, RM 8-2  
Xerox network print queue  
CM = Guide to Configuring and Managing the System  
IS = IPDS Solutions Guide PD = Guide to Using PDL  
Maintenance SJ = Guide to Submitting Jobs from the Client  
DC = Decomposition Service and Tools Guide  
IP = Installation Planning Guide  
PJ = Guide to Managing Print Jobs  
SO = System Overview Guide  
RM -Guide to Performing Routine  
TG = Troubleshooting Guide  
INDEX-36  
Master Index  
 

Weed Eater Tiller WER500D User Manual
Westinghouse Fryer WST3034 User Manual
Whirlpool Dryer Accessories WTW5600SQ0 User Manual
Whistler Radar Detector 550 User Manual
White Rodgers Thermostat 37 5148B User Manual
Williams Sound Stereo System T1 173 User Manual
Yamaha Electronic Keyboard CLP 152S User Manual
Zanussi Plumbing Product 132535 User Manual
Zanussi Washer F 1203 W User Manual
Zanussi Washer FL 1014 V1 User Manual