Westinghouse Iron WST5000ZE User Manual

STEAM &  
DRY IRON  
E L D ’ U T I L I S A  
MODEL WST5000ZE  
OWNER’S MANUAL  
R V E T À S E C  
R À R E P  
 
ADDITIONAL IMPORTANT  
SAFEGUARDS  
CAUTION HOT SURFACES: This appliance generates heat and escap-  
ing steam during use. Proper precautions must be taken to prevent  
the risk of burns, fires or other damage to persons or property.  
1. All users of this appliance must read and understand this Owner’s Manual  
before operating or cleaning this appliance.  
2. The cord to this appliance should be plugged into a 120V AC electrical  
outlet only.  
3. If this appliance begins to malfunction during use, immediately unplug the  
cord. Do not use or attempt to repair the malfunctioning appliance.  
4. Do not leave this appliance unattended during use.  
POLARIZED PLUG  
l e c t r i q u e .  
n e r d e f a ç o n a d é q u a t e . I l f a u t a l o r s l e b r a n c h e r s u r u n a u t r e  
This appliance has a po a ized plug (one blade is wider than the other).  
c u i t é l e c t r i q u e e s t s u r c h a r g é , l ’ a p p a r e i l p o u r r a i t n e p a s  
To reduce the risk of electric shock, this plug is intended to fit into a  
polarized outlet only one way. If the plug does not fit fully in the outlet,  
E N T A T I O N É L E C T R I Q U E  
reverse the plug. If it still does not fit, contact a qualified electrician. Do  
not attempt to modify the plug in any way.  
e r d e m o d i f i e r o u d e c o n t o u r n e r c e d i s p o s i t i f d e s é c u r i t é .  
e t o u j o u r s p a s , f a i r e a p p e l à u n é l e c t r i c i e n p r o f e s s i o n n e l . N e  
ELECTRIC POWER  
a s e n t i è r e m e n t d a n s l a p r i s e , e s s a y e r d a n s l ’ a u t r e s e n s . S i e l l e  
n e p r i s e m u r a l e p o l a r i s é e q u e d a n s u n s e u l s e n s . S i l a f i c h e n e  
If the electrical circuit is overloaded with other appliances, your appli-  
d e d é c h a r g e s é l e c t r i q u e s , c e t y p e d e f i c h e n e p e u t ê t r e i n s é r é  
ance may not operate properly. It should be operated on a separate  
e ( l ’ u n e d e s l a m e s e s t p l u s l a r g e q u e l ’ a u t r e ) . P o u r r é d u i r e l e s  
electrical circuit from other appliances.  
s u r e d e s é c u r i t é , c e t a p p a r e i l e s t m u n i d ’ u n e f i c h e é l e c t r i q u e  
E P O L A R I S É E  
e r l ’ a p p a r e i l s a n s s u r v e i l l a n c e d u r a n t l ’ u t i l i s a t i o n .  
p p a r e i l d é f e c t u e u x .  
m é d i a t e m e n t e t l e d é b r a n c h e r . N e p a s u t i l i s e r n i t e n t e r d e  
p r é s e n t e d e s s i g n e s d e d é f e c t u o s i t é d u r a n t l ’ u t i l i s a t i o n ,  
c o r d o n d e c e t a p p a r e i l u n i q u e m e n t s u r u n e p r i s e é l e c t r i q u e  
n n e r c e t a p p a r e i l o u d e l e n e t t o y e r .  
s a t e u r s d o i v e n t l i r e a t t e n t i v e m e n t l e p r é s e n t m a n u e l a v a n t d e  
s d o m m a g e s c o r p o r e l s o u m a t é r i e l s .  
r i é e s p o u r p r é v e n i r l e s r i s q u e s d e b r û l u r e s , d ’ i n c e n d i e s o u  
l e s t e n m a r c h e . I l e s t i m p o r t a n t d e p r e n d r e l e s p r é c a u t i o n s  
N G A R D E : C e t a p p a r e i l p r o d u i t d e l a c h a l e u r e t d e l a v a p e u r  
S C O N S I G N E S D E S É C U R I T É  
3
 
GETTING TO KNOW YOUR  
WESTINGHOUSE WST5000ZE  
STEAM & DRY IRON  
PRODUCT MAY VARY SLIGHTLY FROM ILLUSTRATION.  
4
5
3
2
1
7
6
8
9
1. Water Fill Port Cover  
2. Water Fill Port  
3. Adjustable Steam Dial  
4. Swivel Cord  
6. Cord Winder  
7. Red Indicator Light  
8. Soleplate  
9. Temperature Dial  
5. Heel Rest  
4
 
FEATURES  
TEMPERATURE DIAL  
Select temperatures based on the type of  
fabric to be ironed.  
t .  
l e  
ADJUSTABLE STEAM DIAL  
For selecting dry  
ironing, turn to OFF.  
For steam ironing, adjust dial  
to preferred steam position.  
SWIVEL CORD FOR LEFT- AND  
RIGHT-HANDED USERS  
à l a  
Pivots up and down and is supported to  
prevent dragging along the fabric. The  
flexible grommet protects the cord from  
fraying.  
l e  
c h e a u  
d ’ u n  
WATER FILL PORT  
Easy to fill for using steam feature.  
p o s i -  
l a  
m a n d e  
E U R  
CORD WINDER  
Holds cord conveniently and safely when  
iron is stored.  
n
E
Q A U E S  
5
 
BEFORE USING FOR THE FIRST TIME  
Carefully unpack your Iron and remove all packaging materials and  
any adhesive stickers from the Soleplate. Make sure all adhesive is  
removed by rubbing Soleplate with a damp cloth. To remove any dust  
that may have accumulated on the Iron during packaging, simply wipe  
with a clean, damp cloth. Do not use abrasive cleansers. Do not put the  
Iron, cord or plug in water.  
NOTE: Before you use your Iron for the first time, you should  
flush the Soleplate steam vents to ensure that no stain is  
transferred onto fabric from residue possibly left in the  
vents from the manufacturing process. To do this, see USER  
MAINTENANCE INSTRUCTIONS - ”CLEANING SOLEPLATES  
HOLES, p.13  
1. For best results, check garment labels for the temperature and steam  
setting recommended by the fabric manufacturer.  
2. To prevent damaging garments from too hot of an Iron, it is best to  
first Iron garments that require low temperature. If you should need  
to switch from a high setting to a lower temperature, for example  
LINEN to NYLON, allow the Iron about 5 minutes to reach the lower  
temperature.  
TIPS  
If you are unsure of a garment’s fabric content, start on a low setting  
and test the Iron on an area of the garment that does not show, such  
as a seam. Gradually increase the heat setting until wrinkles remove  
without damaging the fabric. To freshen up garments made of velvet,  
felt, suede or velour, hold the steaming Iron horizontally 2 inches above  
the fabric for a gentle steaming. Make sure the Iron does not come in  
contact with the fabric. To prevent shine, iron dark garments or those  
made of silk, acetate or rayon inside out.  
CAUTION: To prevent fire, do not leave Iron unattended while  
plugged in.  
6
 
u e r d e s Ob r Pû l u Er Re s A. TING INSTRUCTIONS  
q u e s c h a u d e s , d e l ’ e a u c h a u d e o u d e l a v a p e u r p e u t  
r l e f e r a v e c p r é c a u t i o n . L e c o n t a c t a v e c d e s p i è c e s  
N G A R D DE R: P YO IU RR OP NR É IV NE N GI R L E S R I S Q U E S D E B R Û L U R E ,  
The Iron can be used on the dry setting with or without water in the tank,  
N G A R D E : D é b r a n c h e r l ’ a p p a r e i l a v a n t d e l e r e m p l i r  
however it is best to avoid having the tank too full of water during dry  
a l i s é e .  
ironing.  
d u r e , i l e s t r e c o m m a n d é d ’ u t i l i s e r d e l ’ e a u d i s t i l l é e o u  
1. Before first use, remove any adhesive stickers from the Soleplate. Make  
p o u r r e p a s s e r à l a v a p e u r . C e p e n d a n t , d a n s l e s r é g i o n s o ù l ’ e a u  
sure all adhesive is removed by rubbing Soleplate with a damp cloth.  
é c i a l e d e l a s e m e l l e p e r m e t d ’ u t i l i s e r l ’ e a u d u  
2. With the Iron unplugged turn Steam Dial to “OFF”.  
S S A G E À L A V A P E U R  
This will stop the flow of steam if water is in the Reservoir.  
3. Turn Temperature Dial to “MIN” setting.  
u d , N E P A S r e m p l i r l e r é s e r v o i r d ’ e a u .  
4. Plug the cord into a 120V AC electrical outlet.  
N l o n G g A u e R D p é E r i : o d e e t q u ’ i l e s t  
5. Turn Temperature Dial to desired setting. (See “IRONING GUIDE” for  
, s i g n e q u e e f e r c h a u f f e p o u r m a i n t e n i r l a t e m é r a t u r e a p p r o p r i é e .  
detailed information.) The Red Indicator Light will turn on as soon as the  
Q v o U y E a n : t d e p r ê t - à - l ’ e m p l o i p o u r r a i t s e  
Iron is plugged in and the Temperature Dial is turned to a heat setting  
d e l e r a n g e r .  
above “MIN”.  
t l e l a i s s e r r e f r o i d i r c o m p l è t e m e n t a v a n t d ’ e n n e t t o y e r l a  
o m m a n d e d Ne Od é Tb Ei t : d We hv ea np te uu rr neà dl a onp o fos i rt i o thn eO firF sF t. tiD mé eb ,r ya on uc rh ne r ew Iron may emit an  
p a s s a g e , r é g l e r l a c o m m a n d e d e t e m p é r a t u r e à l a p o s i t i o  
odor for up to 10 minutes. This is due to the initial heating of the  
materials used in making the Iron. The odor is safe and should not  
n e u x s ’ é t e i n t , l e f e r e s t p r ê t .  
reoccur after initial heating.  
a i s s e r l ’ a p p a r e i l c h a u f f e r a u r é g l a g e c h o i s i . L o r s q u e l e  
p a r e i l s u r s o n t a l o n d ’ a p p u i s u r u n e s u r f a c e s t b l e e t  
6. Place Iron on its Heel Rest and place on a stable, protected surface.  
a r a î t r e a p r è s l a p r e m i è r e u t i l i s a t i o n .  
Allow Iron to heat to selected temperature setting. When Red Indicator  
c o n s t i t u a n t l ’ a p p a r e i l . L ’ o d e u r n e p r é s e n t e a u c u n d a n g e r e t  
Light turns off, the Iron is ready for use.  
e d i z a i n e d e m i n u t e s . C e l a r é s u l t e d u c h a u f f a g e i n i t i a l d e s  
7. When finished ironing, turn Temperature Dial to “MIN” and Steam Dial  
t i o n , l e f e r p e u t d é g a g e r u n e o d e u r  
to “OFF”. Unplug Iron from wall outlet. Allow Iron to cool completely  
M I N .  
before cleaning the exterior or storing.  
a l l u m e d è s q u e l e f e r e s t b r a n c h é e t q u e l e r é g l a g e e s t  
NOTE: During ironing, the Temperature Ready Light may turn on again  
I D E D E R E P A S S A G E p o u r p l u s d e p r é c i s i o n s . ) L e v o y a n t  
which indicates that the Iron is heating up to maintain the proper  
o m m a n d e d e t e m p é r a t u r e à l a p o s i t i o n d é s i r é e . ( V o i r l a  
temperature.  
c o r d o n d a n s u n e p r i s e é l e c t r i q u e c . a . d e 1 2 0 V .  
CAUTION: If the Iron has been used for a long time and is hot. DO NOT  
o m m a n d e d e t e m p é r a t u r e à l a p o s i t i o n M I N .  
fill it with water. Allow to cool, then refill and resume ironing.  
’ i l y a d e l ’ e a u d a n s l e r é s e r v o i r .  
p e u r à l a Sp To Es i At i o Mn O IF RF . OC Ne l a INc o Gu p e r a  
r a n c h e r l e f e r , r é g l e r l a c o m m a n d e d e  
NOTE: Due to the special Soleplate design, ordinary tap water may be  
used in this Iron. However, in very hard water areas, we recommend the  
’ e n l e v e r t o u t r é s i d u e n f r o t t a n t l a s e m e l l e a v e c u n l i n g e  
use of distilled water or water which has been demineralized.  
e m i è r e u t i l i s a t i o n , r e t i r e r t o u t a u t o c o l l a n t d e l a s e m e l l e .  
WARNING: Before filling Iron with water, make sure the plug is  
r à s e c .  
removed from the wall socket.  
a n t , i l e s t p r é f é r a b l e d e n e p a s t r o p r e m p l i r l e r é s e r v o i r d ’ e a u p o u r  
WARNING: TO PREVENT THE RISK OF BURNS, use caution when  
u t i l i s e r l e f e r a u r é g l a g e à s e c , a v e c o u s a n s e a u d a n s l e r é s e r v o i r ;  
filling Iron with water. Burns can occur from touching hot metal  
S S A G E À S E C  
parts, hot water, or steam.  
D E D ’ E M P L  
7
 
OPERATING INSTRUCTIONS (Cont.)  
STEAM IRONING (Cont.)  
When using as a Steam Iron, be sure the temperature setting on the  
Temperature Control Dial is within the WOOL to LINEN setting to avoid  
water spotting on the garment.  
1. Before first use, remove any adhesive stickers from the Soleplate.  
Make sure all adhesive is removed by rubbing Soleplate with a  
damp cloth.  
2. Turn Steam Dial to “OFF”.  
This will stop the flow of  
steam if water is in the Reservoir.  
3. Turn Temperature Dial to “MIN”.  
4. With the unit UNPLUGGED, lift Water Fill Port Cover and pour water  
through Water Fill Port to the “MAX” water level.  
CAUTION: Never fill Iron with fabric conditioner, starches, or  
any other solution as these will damage the steam mecha-  
nism. Do not use contaminated water.  
5. Plug the cord into a 120V AC electrical outlet.  
6. Turn Temperature Dial to “WOOL”, “COTTON” or “LINEN” setting.  
(If the temperature is set below these temperatures, steam will not be  
able to form properly and water may drip from the Soleplate.)  
The Red Indicator Light will turn on as soon as the Iron receives  
power and the Temperature Dial is turned to a heat setting above  
“MIN”.  
NOTE: When turned on for the first time, your new Iron may emit an  
odor for up to 10 minutes. This is due to the initial heating of the mate-  
rials used in making the Iron. The odor is safe and should not reoccur  
after initial heating.  
7. Turn Steam Dial to adjust steam rate. When using the maximum  
steam rate, the iron uses more water and it may be necessary to fill  
the Reservoir more often.  
8. Place Iron on its Heel Rest and place on a stable, protected surface.  
Allow Iron to heat to selected temperature setting. When Red  
Indicator Light turns off, the Iron is ready for use.  
9. When finished ironing, turn Temperature Dial to “MIN” and Steam  
Dial to “OFF”. Unplug Iron from wall outlet. Allow Iron to cool com-  
pletely before cleaning the exterior of the Iron or storing.  
CAUTION: Avoid coming in contact with escaping steam.  
CAUTION: If the Iron has not been used for a long period of time and  
is hot, DO NOT fill it with water. Allow to cool, then refill and resume  
ironing.  
8
 
IRONING GUIDE  
SELECTING IRON TEMPERATURES  
Always read garment labels and follow the manufacturer’s ironing  
instructions. Refer to the “Ironing Chart” on the next page for tempera-  
ture recommendations:  
ACRYLIC/SILK  
Use low settings for acrylic, silk and synthetics.  
RAYON/WOOL Use moderate settings for rayon, wool, and fabrics  
with more than 20% rayon or wool.  
COTTON/LINEN Use high settings for cotton, linen, and blends.  
IRONING HINTS  
r u n l i n g e .  
d e l u s t r e r l e s t i s s u s c o m m e l e v e l o u r s , l a l a i n e , l e l i n e t l a  
Warning! To prevent fire, do not leave Iron unattended while  
plugged in.  
d ’ a t t e i n d r e l e n o u v e a u r é g l a g e .  
n v i r o n d e u x m i n u t e s p o u r l a i s s e r à l ’ a p p a r e i l l e t e m p s d e  
1. Sort articles to be ironed acco ding o the type of fabric. This will  
r r é d u i t l a t e m p é r a t u r e p o u r r e p a s s e r d e s t i s s u s f r a g i l e s ,  
reduce the need to adjust the temperature for different types of  
garments.  
t e r g r a d u e l l e m e n t l a c h a l e u r j u s q u ’ à c e q u e l e s r é s u l t a t s  
f a i s a n t s .  
2. If you are not s e of the fiber content of a garment, test a small  
r u n e p a r t i e v i s i b l e . R é g l e r d ’ a b o r d à t e m p é r a t u r e b a s s e  
area such as a se m or inside hem s ction before ironing a visible  
u n e p e t i t e s u r f a c e c o m m e u n e c o u t u r e o u u n o u r l e t a v a n t  
area. Start with a low temperature setting and gradually increase to  
u t e s u r l a t e n e u r e n f i b r e s d ’ u n v ê t e m e n t , f a i r e d ’ a b o r d  
find the best setting.  
h a q u e f o i s l e r é g l a g e d e l a t e m p é r a t u r e .  
3. When reducing the tempe ature for iron sensitive fabrics, allow  
t i c l e s à r e p a s s e r s e l o n l e t y p e d e t i s s u p o u r é v i t e r d ’ a v o i r à  
app oximately 2 minute for the iron to co l to the new temperature  
setting.  
l ’ a p p a r e i l b r a n c h é l o r s q u ’ i l n ’ e s t p a s u t i l i s é .  
n g a r d e : P o u r é v i t e r l e s r i s q u e s d ’ i n c e n d i e , n e j a m a i s  
4. Fabrics such as velour, wool, linen and silk are best ironed with an  
ironing cloth to prevent shine marks.  
S E I L S P O U R L E R E P A S S A G E  
N s u s / e L n I N c o t o n e t  
l a i n e .  
n g e s c o n t e n a n t  
N t N i s s E u s / e L n A I N E  
u Q s e U n E a / c r S y O l i q I u E e ,  
s r e c o m m a n d a t i o n s c o n c e r n a n t l e s t e m p é r a t u r e s :  
g e . S e r e p o r t e r a u t a b l e a u d e r e p a s s a g e à l a p a g e s u i v a n t e  
s l i r e l ’ é t i q u e t t e d u f a b r i c a n t e t s u i v r e l e s i n s t r u c t i o n s d e  
X D E S T E M P É R A T U R E S D E R E P A S S A G E  
D E D E R E P  
9
 
IRONING GUIDE (Cont.)  
TEMPERATURE  
SETTING  
IRONING  
RECOMMENDATIONS  
FABRIC  
Acrylic  
Acetate  
Silk  
ACRYLIC  
ACRYLIC  
SILK  
Dry iron inside out.  
Dry iron inside out while still damp.  
Iron inside out. Use an ironing cloth  
to prevent shine marks.  
Nylon  
SILK  
Iron inside out while still damp.  
Iron inside out while still damp.  
Iron inside out.  
Polyester  
Rayon  
SILK  
RAYON  
RAYON  
Viscose  
Mainly dry iron. Steam can be used under  
manufacturer’s instructions.  
Wool  
WOOL  
Steam iron inside out or use an ironing cloth.  
Steam iron inside out or use an ironing cloth.  
Wool Blends WOOL  
Cotton Blends COTTON  
Check label and follow manufacturer’s  
instructions. Use setting for the fiber requiring  
the lowest setting.  
Corduroy  
Cotton  
Linen  
COTTON  
COTTON  
LINEN  
Steam iron inside out or use ironing cloth and  
brush to raise the pile.  
Dry iron while still damp or use steam.  
Iron inside out or use an ironing cloth to  
prevent shine marks, especially with dark  
colors. Dry iron while still damp or use steam.  
Denim  
LINEN  
Use steam.  
10  
 
USER MAINTENANCE INSTRUCTIONS  
This appliance requires little maintenance and contains no user service-  
able parts. Do not try to fix it yourself. Refer it to a qualified repair tech-  
nician if servicing is needed.  
CAUTION: Always allow Iron to cool completely before  
cleaning.  
CARE AND CLEANING:  
1. Turn Steam Dial to “OFF”.  
2. Turn Temperature Dial to “MIN”.  
3. Unplug Iron from electrical outlet.  
4. With Soleplate facing away from you, lift Water Fill Port Cover and  
u m i d i t é c a u s e r a i t d e l a c o r r o s i o n s u r l a s e m e l l e o u l a  
carefully turn Iron upside down over a sink. Let remaining water  
p u i e t n o n s u r l a s e m e l l e . S i l ’ a p p a r e i l e s t r a n g é à p l a t , l a  
empty out. Shake Iron gently to remove all water from Reservoir.  
c o r d o n a u t o u r d u r a n g e - c o r d o n . R a n g e r l ’ a p p a r e i l s u r l e  
Close Water Fill Port Cover.  
.
CAUTION: Water in Reservoir may still be hot. Avoid con-  
p a r e i l s u r s o n t a l o n d ’ a p p u i e t l a i s s e r t o u t e l ’ h u m i d i t é  
tact with skin.  
e r a i t o u e n d o m m a g e r a i t l a s u r f a c e .  
5. Wipe the Soleplate with a damp, soft cloth after each use.  
l a s e m e l l e o u l ’ e x t é r i e u r d e l ’ a p p a r e i l c a r c e l a  
CAUTION: Never use scouring pads, abrasives or chemical  
, d e n e t t o y a n t c h i m i q u e o u d e s o l v a n t p o u r  
cleaners or solvents to clean your coated Soleplate or exte-  
G A R D E : N e j a m a i s u t i l i s e r d e t a m p o n à r é c u r e r ,  
rior of the Iron, as these will scratch and/or damage the  
surface.  
s e m e l l e a v e c u n l i n g e d o u x h u m i d e a p r è s c h a q u e  
6. Set Iron on its Heel Rest and allow any remaining moisture to  
É v i t e r t o u t c o n t a c t a v e c l a p e a u .  
evaporate.  
G A R D E : L ’ e a u d u r é s e r v o i r p e u t ê t r e e n c o r e  
7. Wrap cord around the heel rest. Store the Iron on the Heel Rest, not  
e n t . R e f e r m e r l e c o u v e r c l e .  
on the Soleplate. If the Iron is stored soleplate down, even the small-  
a u s ’ é c o u l e r . S e c o u e r d o u c e m e n t l ’ a p p a r e i l p o u r l e v i d e r  
est amount of moisture will cause corrosion and staining of the  
r a v e c p r é c a u t i o n l e f e r à l ’ e n v e r s a u - d e s s u s d ’ u n é v i e r .  
Soleplate.  
t o u r n é e v e r s l ’ e x t é r i e u r , s o u l e v e r l e c o u v e r c l e d u r é s e r v o i r  
r l ’ a p p a r e i l .  
o m m a n d e d e t e m p é r a t u r e à l a p o s i t i o n M I N .  
o m m a n d e d e d é b i t d e v a p e u r à l a p o s i t i o n O F F .  
O Y A G E  
è t e m e n t a v a n t d e l e r a n g e r .  
N G A R D E : T o u j o u r s l a i s s e r l ’ a p p a r e i l r e f r o i d i r  
m e . C o n f i e r t o u t e r é p a r a t i o n à u n r é p a r a t e u r q u a l i f i é .  
t ê t r e r é p a r é p a r l ’ u t i l i s a t e u r . N e p a s t e n t e r d e l e r é p a r e r  
p a r e i l n é c e s s i t e p e u d ’ e n t r e t i e n . I l n e c o n t i e n t a u c u n e p i è c e  
T R U C T I O N S D ’ E N T R E T I E N  
11  
 
USER MAINTENANCE INSTRUCTIONS  
(Cont.)  
WARNING: TO PREVENT THE RISK OF BURNS, use caution  
when cleaning soleplate holes. Burns can occur from touching  
hot metal parts, hot water, or steam.  
CLEANING SOLEPLATE HOLES  
1. Be sure Iron is unplugged, Steam Dial is “OFF”, and Temperature  
Dial is set to “MIN”.  
2. Lift Water Fill Port Cover and fill Reservoir (see “Steam Ironing”).  
3. Plug Iron into electrical outlet.  
4. Turn Temperature Dial to “LINEN”.  
5. As soon as Red Indicator Light turns off, unplug Iron and hold over a  
sink.  
6. With Soleplate facing away from you,  
turn Steam Dial to steam-cleaning  
position. See Figure 1. The Iron will  
force steam out of the holes and clean  
the holes of calcium and other mineral  
deposits.  
7. Set the Steam Dial back to “OFF”  
position.  
8. Repeat steps 1-7 until no steam comes  
out of the soleplate holes.  
Figure 1  
12  
 
USER MAINTENANCE INSTRUCTIONS  
(Cont.)  
CLEANING SOLEPLATE SURFACE  
CAUTION: Unplug the Iron from the electrical outlet before  
cleaning the exterior of the Iron and storing. Never immerse  
an appliance in water or other liquid.  
d e l ’ e n d o Tm om pa rog te er cte t hd ee sl oe leb pr i ls ae ter . from scratching, avoid ironing over snaps, zip-  
c a u s e r d pe et re sn , s mi o en tas lu br ul e ttoc no sr ,d eo tn c.l à Alo soù ,i dl oe s nt or a t c pc lo ar cd eé tha eu if re or n, a ou n metal or rough  
o u b r a n c h sué r. faN ce esj a . m Slia gi hs te sn cr ro au tcl e hr esl e inc o nr od no -n sts ice kr r sé oa leu pt o lau ter sd du of e nr o. t affect perfor-  
e r a n g e r ms au nr cl a e s oe fm the el l e ir. oN n.e j a m a i s r a n g e r l e f e r s ’ i l e s t e n c o r e  
R E N P O S I T I O N V E R T I C A L E , E N A P P U I S U R S O N T A L O N . N e  
If starch or other residues cling to the soleplate, use a commercial type  
c h e r l e f e r e t v i d e r l e r é s e r v o i r . L a i s s e r l e f e r r e f r o i d i r . L E  
hot iron cleaner (found in local grocery or discount or hardware stores)  
according to products directions.  
G E M E N T  
The Iron should be fully cooled before Soleplate cleaning begins. Make  
sure the Iron is unplugged before cleaning. Empty the Water Tank of  
any remaining water. Apply a small amount of mild cleaner to a damp  
.
s r e p r i s e s s u r u n v i e u x l i n g e a f i n d e r e t i r e r t o u t r é s i d u d e l a  
cloth. Gently rub Soleplate, then wipe with a moist cloth. NEVER USE  
T D E R É U T I L I S E R L E F E R  
scouring pads or abrasives cleaners on the Soleplate, as this may  
r é s e r v o i r d ’ e a u .  
scratch the surface. Wipe all other surfaces with a slightly damp cloth.  
r . N E J A M A I S v e r s e r d e n e t t o y a n t s c h i m i q u e s o u d e s o l v a n t s  
Never allow water or any other liquid to get into the unit, except when  
p é n é t r e r d a n s l e f e r , s a u f l o r s q u e v i e n t l e t e m p s d e r e m p l i r l e  
filling the Water Tank. NEVER put any chemical cleaning agents or sol-  
l i n g e l é g è r e m e n t h u m i d e . N e j a m a i s l a i s s e r d ’ e a u o u d ’ a u t r e  
vents in the Water Tank.  
, a u r i s q u e d e l ’ é g r a t i g n e r . E s s u y e r t o u t e s l e s a u t r e s s u r f a c e s  
BEFORE USING AGAIN, preheat and move Iron over an old cloth  
U T I L I S E R d e t a m p o n r é c u r a n t o u d e n e t t o y a n t a b r a s i f s u r l a  
several times to remove any residue from the Soleplate.  
d o u c e m e n t l a s e m e l l e , p u i s l ’ e s s u y e r a v e c u n l i n g e h u m i d e . N E  
e r u n e p e t i t e q u a n t i t é d e n e t t o y a n t à l ’ a i d e d ’ u n l i n g e h u m i d e .  
’ e n n e t t o y e r l a s e m e l l e . V i d e r c o m p l è t e m e n t l e r é s e r v o i r d ’ e a u .  
STORAGE  
e f e r r e f r o i d i r c o m p l è t e m e n t e t s ’ a s s u r e r q u ’ i l e s t d é b r a n c h é  
Unplug appliance and empty any water left in water tank. Allow unit to  
n s à r a b a i s e t l e s q u i n c a i l l e r i e s ) e t s e c o n f o r m e r a u x i n s t r u c t i o n s .  
cool. STORE IN UPRIGHT POSITION ON HEEL REST. Never store Iron  
n t à f e r c o m m e r c i a l ( q u ’ o n t r o u v e d a n s l e s é p i c e r i e s , l e s  
lying on the Soleplate. Never store it while it is hot or still plugged in.  
e m p o i s o u d ’ a u t r e s r é s i d u s a d h è r e n t à l a s e m e l l e , u t i l i s e r u n  
Never wrap cord tightly around the appliance. Do not put any stress on  
a n t i a d h é ths ei v e con rdo n wt hp ea res d it’ i en nc ti ed re sn tc he es uu nr itl ,e ar se n itd ce om ue ldn t cad u sf ee r th. e cord to fray and  
s u r f a c e s be rn eam k.é t a l o u r u g u e u s e s . D e l é g è r e s é g r a t i g n u r e s s u r l a  
n , l e s g l i s s i è r e s , l e s b o u t o n s e n m é t a l , e t c . N e p a s d é p o s e r l e f e r  
t e r d ’ é g r a t i g n e r l a s e m e l l e , é v i t e r d e r e p a s s e r l e s b o u t o n s -  
e a u o u t o u t a u t r e l i q u i d e .  
e u r e t d e l e r a n g e r . N e j a m a i s i m m e r g e r l ’ a p p a r e i l  
N G A R D E : D é b r a n c h e r l e f e r a v a n t d ’ e n n e t t o y e r  
O Y A G E D E L A S E M E L L E  
R E T I E N  
13  
 
LIMITED ONE-YEAR WARRANTY  
Warranty Coverage: This product is warranted to be free from defects in  
materials or workmanship for a period of one (1) year from the original pur-  
chase date. This product warranty is extended only to the original con-  
sumer purchaser of the product and is not transferable. For a period of  
one (1) year from the date of original purchase of the product, our Repair  
Center will, at its option, either (1) repair the product or (2) replace the  
product with a reconditioned comparable model. These remedies are the  
purchaser's exclusive remedies under this warranty.  
Warranty Service: To obtain warranty service, you must call our warranty  
service number at 1-800-233-9054 for return instructions on how to deliver  
the product, in either the original packaging or packaging affording an  
equal degree of protection to the Repair Center specified below. You must  
enclose a copy of your sales receipt or other proof of purchase to demon-  
strate eligibility for warranty coverage.  
To return the appliance, ship to:  
ATTN: Repair Center  
708 South Missouri Street  
Macon, MO 63552 USA  
To contact us, please write to, call, or email:  
Consumer Relations Department  
PO Box 7366  
Columbia MO 65205-7366 USA  
1-800-233-9054  
E-mail:  
What Is Not Covered: This warranty does not cover damage resulting  
from misuse, accident, commercial use, improper service or any other  
damage caused by anything other than defects in material or workmanship  
during ordinary consumer use. This warranty is invalid if the serial number  
has been altered or removed from the product. This warranty is valid only  
in the United States and Canada.  
LIMITATION ON DAMAGES: THERE SHALL BE NO LIABILITY FOR  
ANY INCIDENTAL OR CONSEQUENTIAL DAMAGES FOR BREACH OF  
ANY EXPRESS OR IMPLIED WARRANTY OR CONDITION ON THIS  
PRODUCT.  
DURATION OF IMPLIED WARRANTIES: EXCEPT TO THE EXTENT  
PROHIBITED BY APPLICABLE LAW, ALL IMPLIED WARRANTIES AND  
CONDITIONS, INCLUDING, WITHOUT LIMITATION, IMPLIED WAR-  
RANTIES AND CONDITIONS OF MERCHANTABILITY AND FITNESS  
FOR A PARTICULAR PURPOSE OR USE ON THIS PRODUCT ARE LIM-  
ITED IN DURATION TO THE DURATION OF THIS WARRANTY.  
Some jurisdictions do not allow the exclusion or limitation of incidental or  
consequential damages, or allow limitations on how long an implied war-  
ranty lasts, so the above limitations or exclusions may not apply to you.  
This warranty gives you specific legal rights and you may have other rights  
under the laws of your jurisdiction.  
For more information on our products, visit our website: www.maxim-toastmaster.com.  
 

Weed Eater Trimmer 530163368 User Manual
Weslo Treadmill WLTL25320 User Manual
Westinghouse Flat Panel Television CW40T6DW User Manual
Whirlpool Air Conditioner ACS072XE User Manual
Whirlpool Convection Oven KEBS107D User Manual
Whirlpool Refrigerator 3VET16GK User Manual
Woods Equipment Compact Loader 2100042 User Manual
Woodstock Saw W1819 W1820 User Manual
Xantrex Technology Battery Charger SW3000 User Manual
Yamaha DVD Player DVD E600 User Manual